rsabeebe

Anybody here know how long the Fabspeed sleeve clamps are on their exhaust systems? I have gotten a price from them, but I didn't get any info on the length and it's pointless to buy unless they are a certain length. Thanks.

AWay

Here are 5 inch ones. http://www.maxspeed-motorsports.com/porscheclamps.html

rsabeebe

that's my other option right now. $89 from maxspeed. i'm just thinking the fabspeed might be better quality and i already have the price from them - $100.

mjsporsche

Just measured my Fabspeed sleeve with clamps.

4 3/4 inches.

BTW......$100 seems a bit much. I bought mine April 2012 for less than $60. I live about 70 miles from their facility and they may have waived shipping.

Mark

alpine-al

Are you sure that you can't use the OE sleeve clamps? You can buy a pair for $60 including shipping. Search for part number 997.111.520.00.

.

rsabeebe

thanks. got some feedback on 6SO and 4.75" seems to be the agreed upon width. that would certainly work. thanks for the info.

fabspeed quoted me $100 on tuesday for the 'clamps and hardware'. would prefer $60. ;-)

rsabeebe

the issue is i knowingly bought a set of mufflers that had been previously modified to shorten the inlet pipe. my choice is longer sleeve clamps or add tubing to the inlet pipe. just trying to figure out the most efficient and cost-effective method. i'm constantly trying different exhaust configs looking for a certain sound.