Lets see your 997...
#2808
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Some nice pics here, I really need to get some descent photos done, but I'm not quite happy with how I want her to look. I can't lower due to garage ramp clearance issues & the turbo front end scrapping, it was a beautiful day so went for a blast & took a few pics.
As for the rear I'm thinking about this upgrade:
Still not sure how the GT3 RS rear bumper will look with a turbo wing!
As for the rear I'm thinking about this upgrade:
Still not sure how the GT3 RS rear bumper will look with a turbo wing!
#2809
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
id think it would look ok!
but for sure you will need more aggressive wheels when its all said + done!
but for sure you will need more aggressive wheels when its all said + done!
Some nice pics here, I really need to get some descent photos done, but I'm not quite happy with how I want her to look. I can't lower due to garage ramp clearance issues & the turbo front end scrapping, it was a beautiful day so went for a blast & took a few pics.
As for the rear I'm thinking about this upgrade:
Still not sure how the GT3 RS rear bumper will look with a turbo wing!
As for the rear I'm thinking about this upgrade:
Still not sure how the GT3 RS rear bumper will look with a turbo wing!
#2811
#2812
#2815
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i did the badging work myself, after seeing a few of my 997 friends take their cars to the dealer to to the re-badging as well as a few 991's that took their 991 to the dealer to have a have a custom PORSCHE 911S badge done. from those examples i took the measurements and worked from there.
full instructions + measurements below, you can buy the oem badging on eBay.
https://rennlist.com/g/album/3372540
![](https://cimg5.ibsrv.net/gimg/rennlist.com-vbulletin/1286x1078/unknown_1652cbb200489785233f75b646bbe53d187f800b.jpeg)
Last edited by myw; 04-25-2017 at 03:46 PM.
#2817
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
sup EC! thank you
oem pasm suspension (wish it was 1cm lower via s-pasm), and spacers yes.
wide body wheels for the rears (basically a builtin+16mm spacer), and a 15mm spacer on the front (8inch front wheel, your fronts are 8.5 - you would need a 5-7mm spacer for your fronts if you wanted the same look).
getting a subtle set of silver/grey Carrera S decals for the doors and a nice classy front lip.
oem pasm suspension (wish it was 1cm lower via s-pasm), and spacers yes.
wide body wheels for the rears (basically a builtin+16mm spacer), and a 15mm spacer on the front (8inch front wheel, your fronts are 8.5 - you would need a 5-7mm spacer for your fronts if you wanted the same look).
getting a subtle set of silver/grey Carrera S decals for the doors and a nice classy front lip.
#2818
#2819
#2820
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
sup EC! thank you
oem pasm suspension (wish it was 1cm lower via s-pasm), and spacers yes.
wide body wheels for the rears (basically a builtin+16mm spacer), and a 15mm spacer on the front (8inch front wheel, your fronts are 8.5 - you would need a 5-7mm spacer for your fronts if you wanted the same look).
getting a subtle set of silver/grey Carrera S decals for the doors and a nice classy front lip.
oem pasm suspension (wish it was 1cm lower via s-pasm), and spacers yes.
wide body wheels for the rears (basically a builtin+16mm spacer), and a 15mm spacer on the front (8inch front wheel, your fronts are 8.5 - you would need a 5-7mm spacer for your fronts if you wanted the same look).
getting a subtle set of silver/grey Carrera S decals for the doors and a nice classy front lip.
Are you adding the 991 front lip?