iPad mini on the 997
#46
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
A few prototype pictures...
![](http://photos.smugmug.com/photos/i-JkvsHhf/0/M/i-JkvsHhf-M.jpg)
#47
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Pfbz looking very good. Do you have room to run the power cable to the Mini? What did you need to do to the horse shoe to get it to fit? Woul love to see a step by step on this.
#48
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Plenty of room for the mini lightning/usb connector behind the bezel. That is an opening for a dummy switch just above it, and the cigarette lighter opening just below it. I knocked off a bit of the plastic around the inside of the switch hole just to ensure plenty of room for the cable.
![](https://www.evernote.com/shard/s46/sh/a2480731-5445-46a9-b4d1-8564618457a0/8e532a9429c641a363e606f4ebb0f7e6/res/bc1e5cc9-e3f1-4aeb-b28b-2639fe990899/skitched-20130128-223708.jpg.jpg?resizeSmall&width=832)
#50
Instructor
Join Date: Aug 2010
Location: Fort Worth, TX
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Is there a way to maintain Bluetooth connectivity with your iPhone? I have a Mobridge installed & it's great, but limited by the crappy PCM interface. I would do this IF Phone via Bluetooth was still possible.
#52
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sure, you can go here:
http://www.flickr.com/photos/82525810@N00/8595518232/
Just navigate to see the rest...
joel
http://www.flickr.com/photos/82525810@N00/8595518232/
Just navigate to see the rest...
joel
#53
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Gotta post again....this is simply awesome!!
#55
Instructor
Join Date: Aug 2010
Location: Fort Worth, TX
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I posed the question above about whether phone connection via Bluetooth was still possible with the head unit removed. So, I sent a message to MoBridge asking whether or not it is possible to integrate their Bluetooth-enabled units and an iPad in a 997. Here was their intriguing response.
"We currently don't have such a solution using our current ABT2010.
Replacement of headunit with an iPad is something that we are working on, but it will be some time before we are
ready to announce any products."
This idea is really taking off. A little more research & I'm on board.
"We currently don't have such a solution using our current ABT2010.
Replacement of headunit with an iPad is something that we are working on, but it will be some time before we are
ready to announce any products."
This idea is really taking off. A little more research & I'm on board.
#56
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sorry to bump an old thread. But this is just awesome! I didn't see it posted but I will assume you have the 4G/Wi-fi model iPad mini?
#57
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
...
Last edited by pfbz; 07-02-2013 at 09:45 PM.
#58
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sorry... wrong thread.