997 Cab roll-bar height - passes the "broomstick test"
#18
Poseur
Rennlist Member
Rennlist Member
#19
Instructor
Thread Starter
Gene
#20
uninformed gas bag
(contemplating on whether gas bag is one or two words)
Rennlist Member
(contemplating on whether gas bag is one or two words)
Rennlist Member
Can they be deployed with the top closed?
I heard some nonsense about a guy coming home after being away and finding his top damaged from the bars deploying with the top up. The story goes that the guys kid took it out and got all four wheels off the ground or something like that and the car sensed a rollover condition and the bars fired.
I heard some nonsense about a guy coming home after being away and finding his top damaged from the bars deploying with the top up. The story goes that the guys kid took it out and got all four wheels off the ground or something like that and the car sensed a rollover condition and the bars fired.
#21
Race Director
You need to either move the steering wheel closer to you or move your seat forward for proper positioning. You wrists should rest on topmof the steering wheelmwith your shoulders pressed back in the seat
#22
Instructor
Mike, late to the party, but does Suncoast allow a 997 cab driver to participate in DE/track days? I would like to at least participate in something, but I've heard different rules apply in different locales. New to P-car world but want to push it a little harder than I can on the streets! Thanks.
#23
Can they be deployed with the top closed?
I heard some nonsense about a guy coming home after being away and finding his top damaged from the bars deploying with the top up. The story goes that the guys kid took it out and got all four wheels off the ground or something like that and the car sensed a rollover condition and the bars fired.
I heard some nonsense about a guy coming home after being away and finding his top damaged from the bars deploying with the top up. The story goes that the guys kid took it out and got all four wheels off the ground or something like that and the car sensed a rollover condition and the bars fired.
#24
Anyone by chance happen to know what setting in PIWIS it is to release them for a 997? I found Fahrzeugocoierung: CODIERUNG Byte 2 Uberrollbugel, which is coding for "roll bar" but its a yes or no choice (mind you this is in development mode/simulation, need to hook up to the actual car)
The following users liked this post:
alaris (04-19-2024)
#25
Instructor
#26
Rennlist Member