Caughtacab911

I finally got to my local dealer for the measurement. With the roll bars deployed and top down, there is ample room between the top of my helmet and the proverbial broomstick (in this case, a level). I had the seat on its lowest position (I'm 6-feet tall). Pics here show the space, and the actual bar height (22 cm or 10 inches). This is proof that the car can be tracked in accordance with any rule that says factory protection must pass the clearance test.

Gene
_________________________________________________
05 911 C2S cabriolet, arctic silver/black/full leather/chrono plus/nav/bose/tooki/sat/Porsche short shifter/SRX = exhilaration
01 MB E320 4Matic wagon, midnight blue/beige/E430 sport wheels = winter driver/summer hauler
08 Audi A3 3.2, S-Line/tiptronic/bose/sat/K40/black on black = wife's ride

Edgy01

Thanks for taking the effort to check this out for us!

Nugget

Yeah. thanks for the pics. This is very informative.

racer

Cool pics. Thanks for sharing. Just remember that, should you actually need those bars, there's a good chance you will move 2+ inches in the stock belts.. still better "duck"

Speed

What are those objects on your windscreen? I don't have them on mine.

gota911

They are the covers for the pop-up roll bars.

ty328

Thank you for posing!

Jim Bacus

I just passed tech. yesterday at Road America with a mkII 997 cab with the same test. Drove the PDK on the track, very nice!

mossjn

Caughtacab911-

Awesome job getting this done. At 6'5", I have always been curious but too lazy to research this one. I will now measure to the 22" mark and figure out if I have an issue.

Thanks alot - again, learn something new everyday.

Edgy01

CAUTION!! Measure to the 22 CENTIMETER mark,--(10 inches).

I suspect the original poster is in Canada.

Soulteacher

8.66 inches, to be completely precise.

19_hole

The original poster is not in Canada.....either Massachusetts or New Hampshire

Caughtacab911

I'm in Mass. actually (North Andover). The dealer in Nashua NH where I had this done could only find a metric tape measure for the shots.

Gene

NYNick

How's does one deploy these for track use? Must we go to the dealer?

NYNick

Well, Metro NY PCA requires roll bars for all 996's and 997's. I don't think the pop ups will qualify.