Moromoto's new 997 headlights. Anyone?
#106
Today is the last day to save on these!
https://merakiautoworks.com/products...led-headlights
Discount code in the description!
-Josh
https://merakiautoworks.com/products...led-headlights
Discount code in the description!
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
BC Forged / Soul Performance / Akrapovic / Bilstein / HRE / AL13 / CSF + more
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
BC Forged / Soul Performance / Akrapovic / Bilstein / HRE / AL13 / CSF + more
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#107
Following
Is there a way to get the 4 led to be on without the main headlight to be on at the same time? I did program the box then got rid of the box and went straight to the fuse box route as well. Yes the switch inside the car is off but the headlights are constantly on.
Thank you in advance.
John
Thank you in advance.
John
#108
The following users liked this post:
Meraki Autoworks (04-27-2023)
#112
#114
To adjust the 997 headlight's vertical aim, this tool makes it easy as warm butter.
https://www.kctool.com/wera-023344-m...n-5-0-x-200mm/
https://www.kctool.com/wera-023344-m...n-5-0-x-200mm/
The following users liked this post:
eggsandwich (04-30-2023)
#115
Did you use an Allen key or a Philips head screwdriver to adjust yours? The instructions say an Allen key, but I can't get a 6" one to reach. And when I pulled out the light to take a look at it, there's instructions that say to adjust verticality, use a Philips head, so I'm confused.
#117
On adjusting the headlights, i park the car 25 ft away from the object in front of the headlights (garage etc) BUT does anyone know how many feet from the bottom should the headlights be? (see circled below) Instructions do not state how many feet.
John
John
#118
It says "match distance (height) of projectors from ground." So, measure how high the projector unit on your car is above the ground. Then adjust the aim vertically until the light cutoff on the wall 25ft away is the same height above ground. This means the beams are level, not aimed up or down, while accounting for minor differences in ride height between different cars. Obviously you want to be on level ground for all this. Hope that helps.
#119
It says "match distance (height) of projectors from ground." So, measure how high the projector unit on your car is above the ground. Then adjust the aim vertically until the light cutoff on the wall 25ft away is the same height above ground. This means the beams are level, not aimed up or down, while accounting for minor differences in ride height between different cars. Obviously you want to be on level ground for all this. Hope that helps.
John
#120
The following users liked this post:
Breakthru (08-22-2023)