PorscheRob23

Lights are in and installed. Used the hard wire method outlined above. No issues, no codes. Converting from a 997.1S with factory Xenons.

Khloesdad

You may need to adjust them at night. Its an easy job.

PorscheRob23

Thanks Boss, was able to do them with a 5mm allen. Took 2 mins

PorscheRob23

Drivers side had to be replaced by morimoto due to a cosmetic defect, so I thought I’d take the opportunity to share photos of what the lights look like with and without sports classic eyelids.



Passenger side: sports classic Drivers side: oem

Blacked out

OEM

Meraki Autoworks

We have plenty of these in stock for anyone interested!

Great solution for 997.1 guys!

-Josh

Ed99

These are super nice!!! How long did it take for the install?

Ed99

These are super nice and high quality lights!!! How long did it take for the install?

Hatzenbach

Well, the headlights themselves just pop in and out
The routing of the cable for the DRL maybe 15 - 30 min
So overall less than an hour

Kare Karlsen

nice

Meraki Autoworks

Have these in stock!

-Josh

Jabamusic

For what model and steering wheel side?

Meraki Autoworks

2005-2013 997 Porsche. We've only sold to American cars so not sure if international cars have any unknown issues. The 997.1 is a lot more plug and play than the 997.2 though.

-Josh

9elvn

Does anyone else notice the light bounce more than OEM? Drove it for the first time today at night and noticed I was blinding other drivers when the road surface got bouncy/rough.

I don’t have any codes so not sure if it’s just how they are or should I aim them a tad low/lower to compensate?

Khloesdad

It seem like that to me. Very sensitive to bumps.

Meraki Autoworks

Having a sale on these for anyone interested, Contact us!

-Josh