I have a set of 19x9 and 19x12 Champion wheels with GT3 Center Caps. I bought a huge lot of rims from an estate sale. I know he had a 2007 Porsche and these rims were on that car. The rear being a 12" rim was that be the 997 GT3 RS? I am selling them and need to know what model they fit.

Thanks in advance!

 

They should be stamped with offsets on the back. That will let you know if they are for a widebody or narrow body car.

 

 

Did the estate sale include any center lock 997 Porsche wheels?

Thxs

 

No this is the only Porsche Rims. I have some HRE's in 5x5 bolt pattern and some in 5x120.

 

Where are you located and what are you asking for these?

 

Wish they were for narrow body 911s! Love those wheels!

 

Those should fit a NB. I'm running a 19x12 et74 and most people's cars can accommodate a bit more outward position than mine. My passenger side sits differently than my driver's side as do a number of 997s so I optimize the side that's the furthest out and let the other side be a little more in, but most peoples 997s are more like my driver's side.

Find out what the fronts are. At 9" width anything around a 50-52 offset should fit.

 

Thanks…I know nothing about offsets but wouldn’t it require spacers for it to fit a narrow body?

 

No, the opposite. The widebody wheels will already be further out because the fenders on those cars are 1" wider. Spacers would push them even further out.

 

Interesting, thanks! I would’ve thought that wheels for a GT3 would not fit without modification to a narrow body car.

 

On my narrow body , I’m running 9x19 ET 53 fronts, and 11.5x19 ET 62 rears. I have a single RG5 wheel and tire as new condition 8.5x19 ET 53 I plan to sell if someone is able to source the same size wheel for the front.

 

For my winter set up I am running Champion RG5B wheels (yours is RG5) on my 997.1 C4S, offsets 57 and 51 front rear, respectively. It fits almost flush to the body, no need for spacers. They are much lighter than any of the OEM wheels, so keep them if you can.

 

can confirm i run them on my 997.1 c2s. my avatar ( shot of the rear of the car ) has them on

 

997 WB RS Wheels need to be around the following spec.

• Rear
  • 19 x 12 et48
  • 5 x 130/Center Lock
• Front
  • 19 x 9 et50
  • 5 x 130/Center Lock