Where can I get off-brand 11mm caliper spacers?
#16
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Slightly off the original topic, but I did this upgrade and thoroughly enjoy it on my C4S. I actually paid the Rennlist member the funds as I realize, it took some time for him to do the R&D. Sure, it material cost is cheap, but heck, better than me spending weeks trying to figure out what fits and does not it.
#17
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here you go guys. From my research these were the cheapest 11mm spacers that I've found... still haven't ordered them yet for my 997 just yet.
hexagone, here is the size you mentioned above.
1/2" ID x 1"OD 7/16" thick which equates to roughly 11.11mm
https://www.extsw.com/collections/1-...-free-shipping
Judging by the image in the ebay post vs the picture from the extsw I do believe the OD is larger than 1 inch though. So here's another option (though I have not tested or got a chance to measure it out just yet... so if someone can measure if there are any OD clearance issues that would be great.)
1/2" ID x 1 1/4" OD 0.438" thick which equates to roughly 11.12mm
https://www.extsw.com/collections/1-...a-thick-316-ss
hexagone, here is the size you mentioned above.
1/2" ID x 1"OD 7/16" thick which equates to roughly 11.11mm
https://www.extsw.com/collections/1-...-free-shipping
Judging by the image in the ebay post vs the picture from the extsw I do believe the OD is larger than 1 inch though. So here's another option (though I have not tested or got a chance to measure it out just yet... so if someone can measure if there are any OD clearance issues that would be great.)
1/2" ID x 1 1/4" OD 0.438" thick which equates to roughly 11.12mm
https://www.extsw.com/collections/1-...a-thick-316-ss