Where to buy wheel spacers for 997.2
05-13-2020, 02:42 PM
#1
Racer
Thread Starter
Where to buy wheel spacers for 997.2
Been searching for wheel spacers for my 2010 C2S 6MT. Want to get Hubcentric with included bolts. Looked on eBay and found many but am leery to purchase from them. I see many here have them, where do you recommend I get them from?
Appreciate the help.
Appreciate the help.
Last edited by David Berry; 05-13-2020 at 03:17 PM.
05-13-2020, 03:07 PM
#2
ECS Tuning
05-13-2020, 03:35 PM
#3
I got mine at ECS. I don't normally like to use them due to some customer service issues I have read about, but FCP Euro did not have what I was looking for. They were shipped quickly Pre-Plague, and turned out just fine.
Advice...Go ahead and do a stud conversion while you have the wheels off. Makes installing your wheels a breeze.
Advice...Go ahead and do a stud conversion while you have the wheels off. Makes installing your wheels a breeze.
05-13-2020, 03:48 PM
#4
Rennlist Member
I got my RSS spacers from Sharkwerks.
The following 3 users liked this post by scadams:
05-13-2020, 03:58 PM
#5
Racer
Thread Starter
I got mine at ECS. I don't normally like to use them due to some customer service issues I have read about, but FCP Euro did not have what I was looking for. They were shipped quickly Pre-Plague, and turned out just fine.
Advice...Go ahead and do a stud conversion while you have the wheels off. Makes installing your wheels a breeze.
Advice...Go ahead and do a stud conversion while you have the wheels off. Makes installing your wheels a breeze.
a great idea. Thanks for the advice.
05-13-2020, 04:13 PM
#6
Rennlist Member
Huh, I've dealt with ECS a lot over the last 14 years and their customer service, including returns, has always been great.
I got mine at ECS. I don't normally like to use them due to some customer service issues I have read about, but FCP Euro did not have what I was looking for. They were shipped quickly Pre-Plague, and turned out just fine.
Advice...Go ahead and do a stud conversion while you have the wheels off. Makes installing your wheels a breeze.
Advice...Go ahead and do a stud conversion while you have the wheels off. Makes installing your wheels a breeze.
05-13-2020, 05:46 PM
#7
Rennlist Member
RSS from FD Motorsports. Included bolts. Your choice or silver or black / mix and match. Spacers were excellent quality.
Trending Topics
05-13-2020, 05:55 PM
#8
I did used OEM 5mm front and ECS rear. If not doing a stud conversion check the supplies bolts. Most of the bolts that come with the spacers are one piece, not two like OEM. ECS has the two piece bolts.
05-13-2020, 06:45 PM
#9
Rennlist
Basic Site Sponsor
Basic Site Sponsor
+1 for ECS
I've used ECS spacers and bolts on 5 different Porsches. They have been perfect every time.
I've used ECS spacers and bolts on 5 different Porsches. They have been perfect every time.
__________________
Visit us online https://emc2design.com
By Porsche enthusiasts
Visit us online https://emc2design.com
By Porsche enthusiasts
For Porsche enthusiasts
05-13-2020, 07:10 PM
#10
Got mine from ECS also. All good.
05-13-2020, 07:13 PM
#11
05-13-2020, 07:45 PM
#12
I have included a direct link for anyone considering upgrading to RSS Spacer Kits: https://roadsportsupply.com/955-957-...eel-lug-bolts/
The following 2 users liked this post by RSSmike:
mikes70 (05-17-2020),
Patrick3000 (05-15-2020)
05-14-2020, 01:36 PM
#13
RL Community Team
Rennlist Member
Rennlist Member
Spacers from Adaptec Speedware and Ti bolts from World Motorsports.
05-14-2020, 03:45 PM
#14
05-14-2020, 05:29 PM
#15
Drifting
Plenty of good advice here but I buy my accessories and parts from Suncoast. They are very knowledgeable and offer good pricing.
https://www.suncoastparts.com/
https://www.suncoastparts.com/