Foxwell NT520 pro
#2
Rennlist Member
I just got it as well.. yeah you can check over revs.
It's something like DME / Vehicle Data / Special Funtions maybe. Click around a bit ..
It's something like DME / Vehicle Data / Special Funtions maybe. Click around a bit ..
Last edited by platinum997; 09-17-2018 at 09:40 PM.
#4
Would help if you mention for 997.1 or 997.2 as well. Can this reset the service reminder as well? Read transmission temp? etc etc
#7
Trending Topics
#8
i have the latest update where i even have control of the rear control module now but never could get reset to work. I have the 510 and contacted foxwell and they told me the 510 and 520 have identical functions for Porsche. Im wondering if thats the case
mike
mike
#9
Just went and looked.
Porsche / Manual Selection / 911 (997) / Diagnosis / Control Units / DME / Live Data / Engine Data / All data
I have a 08 c2s tip
i will try to mess around with it
i did spent like 20 minutes figuring what to do and i am not one of those who is savvy with electronics
thanks
Porsche / Manual Selection / 911 (997) / Diagnosis / Control Units / DME / Live Data / Engine Data / All data
I have a 08 c2s tip
i will try to mess around with it
i did spent like 20 minutes figuring what to do and i am not one of those who is savvy with electronics
thanks
#10
Just went and looked.
Porsche / Manual Selection / 911 (997) / Diagnosis / Control Units / DME / Live Data / Engine Data / All data
I have a 08 c2s tip
i will try to mess around with it
i did spent like 20 minutes figuring what to do and i am not one of those who is savvy with electronics
thanks
Porsche / Manual Selection / 911 (997) / Diagnosis / Control Units / DME / Live Data / Engine Data / All data
I have a 08 c2s tip
i will try to mess around with it
i did spent like 20 minutes figuring what to do and i am not one of those who is savvy with electronics
thanks
I've got this 520 Pro unit and could not reset my oil service reminder with it.
I'm trying to register with FoxwellTech to download any firmware update. But the page 2 registration won't load once I put in my information and click submit.
#11
i have not use the unit to reset the engine oil light
i was able to check for over rev on my car
hopefully someone can charm us the steps on how to remove the engine oil light
i was able to check for over rev on my car
hopefully someone can charm us the steps on how to remove the engine oil light
#12
On a 997.2 pdk it cannot reset service due reminder and cannot read the dme for over rev either .
#14
Rennlist Member
Just about to pull the trigger on a NT520 Pro, can someone confirm whether the latest firmware upgrade will allow you to reset Oil service light on 997.1 ?
The following users liked this post:
lowbee (06-22-2019)