996 Turbo Picture Thread
#992
RL Community Team
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Pretty.
The following users liked this post:
MotoJB (07-10-2019)
#997
Rennlist Member
#998
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
@Oak , is that just a piece of yellow laminex on the headlights? Have any more pictures of that?
![https://www.amazon.com/Lamin-x-1-612Y-Universal-Film-Cover/dp/B006347Q8Q/ref=b2b_gw_d_bia_3/131-6183624-0898441?_encoding=UTF8&pd_rd_i=B006347Q8Q&pd_rd_r=38bb78a1-78eb-46f2-bb2a-b8f53b4195e9&pd_rd_w=XLp13&pd_rd_wg=zpOJU&pf_rd_p=5f450e0f-3d32-4ab7-901f-372f7b576e8a&pf_rd_r=KY78EV21BHNE1CFY32VD&psc=1&refRID=18FGP7JY3PCQW5YJ3MDE](https://rennlist.com/forums/images/misc/amazon_icon.gif)
this pic is of the first attempt which was ok, I initially used some jdm yellow tint which was too light to my liking so I subsequently found the laminex film which was slightly thicker and has a darker yellow tint. I used plastic tape to make a reverse template directly off the headlight by placing the tape around the fog light area and placing a piece of paper and using a lead pencil to ghost trace the raised area of the plastic tape. (note on using the plastic tape: I had to use a succsesive straight pieces around the slightly raised fog light area. wasn't able to simply use one piece aroung the raised area.) Tip: I had to trim the yellow film apporx 1/4" wider than the template to prevent white light bleed around the perimeter. Ideal to find someone that has a cnc die cut that can vector a template and die cut them... let's see some fried eggs sunny side up!
![](https://cimg5.ibsrv.net/gimg/rennlist.com-vbulletin/1500x2000/img_2781_c769a78a8ebef5fd316fe585d97d1dbe22c0ccbc.jpeg)
#999
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
pfbz, yes yellow laminex film from amazon https://www.amazon.com/Lamin-x-1-612...JY3PCQW5YJ3MDE.
this pic is of the first attempt which was ok, I initially used some jdm yellow tint which was too light to my liking so I subsequently found the laminex film which was slightly thicker and has a darker yellow tint. I used plastic tape to make a reverse template directly off the headlight by placing the tape around the fog light area and placing a piece of paper and using a lead pencil to ghost trace the raised area of the plastic tape. (note on using the plastic tape: I had to use a succsesive straight pieces around the slightly raised fog light area. wasn't able to simply use one piece aroung the raised area.) Tip: I had to trim the yellow film apporx 1/4" wider than the template to prevent white light bleed around the perimeter. Ideal to find someone that has a cnc die cut that can vector a template and die cut them... let's see some fried eggs sunny side up!
this pic is of the first attempt which was ok, I initially used some jdm yellow tint which was too light to my liking so I subsequently found the laminex film which was slightly thicker and has a darker yellow tint. I used plastic tape to make a reverse template directly off the headlight by placing the tape around the fog light area and placing a piece of paper and using a lead pencil to ghost trace the raised area of the plastic tape. (note on using the plastic tape: I had to use a succsesive straight pieces around the slightly raised fog light area. wasn't able to simply use one piece aroung the raised area.) Tip: I had to trim the yellow film apporx 1/4" wider than the template to prevent white light bleed around the perimeter. Ideal to find someone that has a cnc die cut that can vector a template and die cut them... let's see some fried eggs sunny side up!
#1000
Three Wheelin'
#1001
Rennlist Member
#1002
Three Wheelin'
#1003
RL Community Team
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I was going to suggest if you could figure out a cheap way to mass produce you probably sell quite few of them. Easy to ship too, just put them in an envelope.
#1004
Pro
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://cimg1.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/img_1370_8095cf754e845a70518dda8e73a517ebb4d6a1dc.jpg)
Car shows everywhere!
![](https://cimg5.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/dscn3114_12025de28049ac077dc14b3506033c8ef2dc10f5.jpg)
This is a real low miler for me!