Just ordered a set. Thank you Clint!
|
Ordered mine as well. Thanks Clint!
|
My retaining screws are totally different, they are torx wide head screws that require no washers.
|
Originally Posted by Kevinmacd
(Post 13153191)
My retaining screws are totally different, they are torx wide head screws that require no washers.
|
Originally Posted by Engineerboy100
(Post 13146080)
You can order at Rennlist price at any time, just send $29.95 Plus $4.95 Shipping to Porschetaillight@gmail.com and I will ship out parts. If you order more than one, you only need to pay shipping once.
Clint |
Order placed. Thanks Clint!!
|
Arrived today. Thanks again Clint.
|
Same shipping price to Canada?
|
Got mine today and installed them already. Thanks Clint!
|
Got mine, fit isn't that good. The trunk touches at the bottom. Made some modifications to the back but still overall too thick for my liking. It's 1/8" think molding, should be 1/4". I gave Clint some feedback, might try the metal ones if they're thinner.
|
Originally Posted by jeanmarcboilard
(Post 13159005)
Got mine, fit isn't that good. The trunk touches at the bottom. Made some modifications to the back but still overall too thick for my liking. It's 1/8" think molding, should be 1/4". I gave Clint some feedback, might try the metal ones if they're thinner.
|
Originally Posted by jeanmarcboilard
(Post 13159005)
Got mine, fit isn't that good. The trunk touches at the bottom. Made some modifications to the back but still overall too thick for my liking. It's 1/8" think molding, should be 1/4". I gave Clint some feedback, might try the metal ones if they're thinner.
|
Originally Posted by jeanmarcboilard
(Post 13159005)
Got mine, fit isn't that good. The trunk touches at the bottom. Made some modifications to the back but still overall too thick for my liking. It's 1/8" think molding, should be 1/4". I gave Clint some feedback, might try the metal ones if they're thinner.
|
3 Attachment(s)
Thanks Clint for the great product and fast delivery!
|
Originally Posted by Carlo_Carrera
(Post 13160641)
There are adjustment screws on the light mounts. Loosen them and slide the mount down a little to provide more clearance.
Originally Posted by fpb111
(Post 13161270)
Watch this vid @ ~ 6:40 he shows adjusting the bracket'
That adjustment is for adjusting the light body itself. This is just a piece of plastic that sits on top of the original mount, which is sitting on the body, all you'd be doing is lowering the tail light. BTW.. I actually have these and when I installed them have the same issue. |
All times are GMT -3. The time now is 11:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands