Notices
996 Turbo Forum 1999-2005
Sponsored by:
Sponsored by:

Wheel alignment

Thread Tools
 
Search this Thread
 
Old 01-31-2022 | 04:29 PM
  #31  
theprf's Avatar
theprf
Race Car
 
Joined: Aug 2017
Posts: 3,899
Likes: 1,934
From: Central MA
Default

Yes, lazy alignment tech. There's no reason why the front toe should be off that much. I also dislike the differences in front camber left-to-right, that's what causes the car to pull to one side or the other. Even if it can't be gotten in spec it ought to be the same on left and right.
The rear may be because of lowering the car, can't get both toe and camber within spec.
Old 01-31-2022 | 06:18 PM
  #32  
RCF925's Avatar
RCF925
Instructor
 
Joined: Dec 2021
Posts: 156
Likes: 61
From: Central Coast, CA
Default

Before I do any alignment, I check tire wear and condition of tires, Then check all suspension parts, If anything needs replacing I do it, Then align or your just throwing money away
Old 01-31-2022 | 06:38 PM
  #33  
powdrhound's Avatar
powdrhound
Rennlist Member
 
Joined: Dec 2010
Posts: 7,229
Likes: 2,022
Default

Originally Posted by Gt3stig
i got an alignment last week.
could you please check over the results for me. Thank you.

I've done a ton of alignments on these cars. Whoever was responsible for this alignment was either incompetent, lazy, drunk, or a combination of the three. Go back to that shop and raise hell....

For a mostly stock car you don't need any fancy suspension pieces...

Last edited by powdrhound; 01-31-2022 at 06:41 PM.



Quick Reply: Wheel alignment



All times are GMT -3. The time now is 02:43 AM.