When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
just noticed your 3rd brake lamp appears to have failed?
i use an led replacement that (iirc) is of european origin. it's been so long, i haven't needed to change it out again. it is bright, with a capital "B".
do you know what aftermarket wing that is? it seems to be techart x strosek related but i can't pin it down.
just noticed your 3rd brake lamp appears to have failed?
i use an led replacement that (iirc) is of european origin. it's been so long, i haven't needed to change it out again. it is bright, with a capital "B".
do you know what aftermarket wing that is? it seems to be techart x strosek related but i can't pin it down.
Break lights are working. Just not using it i. The pic.
Wing is techart type 1 knockoff. A lot of different vendors. I think it is the best looking. A mix of 996gt2 and 997tt. I like it.
What was the solution to your fault codes and warning lights the other day?
It was the connector of the left rear abs sensor. Just as the code reader said. I soldered the wiring and molded a new connector in epoxy. Just a temporary fix until I get new oem connectors which I wil source from a parts car
Break lights are working. Just not using it i. The pic.
Wing is techart type 1 knockoff. A lot of different vendors. I think it is the best looking. A mix of 996gt2 and 997tt. I like it.
yes, i thought it was techart "related". it looks great! i have the strosek ( related design - look ) and your looks great! slightly different. like it a lot.
So, done some bling stuff but I am still not decided that I want to keep it.that way:
Had a turbo logo laying around an put it on the dash, Still not decided if i like it Dashboard logo Hot or Not? Painting lower lip with plastidip. Holds up much better. Success! When doing the roof wrap I also changed the sunroof seal. Car is much quieter. Success. Wrapping for the first time. Tucking the vinyl under the seals was actually the easiest part. Took the surplus wrap and made a windows visor just for fun. Final result of first time wrap. It is a 4 out of 10 job. There are 3 really visible creases but rest of job is ok. I will keep it for a while, but it really should be redone by a pro. posing..
04-19-2020, 05:53 PM
