New Exhaust Enroute
#1
Rennlist Member
Thread Starter
New Exhaust Enroute
Wanted something different went with Supersprint. Any thoughts?
https://www.supersprint.com/public/i...304-349147.jpg
https://www.supersprint.com/public/i...304-349147.jpg
Last edited by 215robert; 12-11-2019 at 01:09 PM. Reason: posted by accident wasn't finished
#7
Trending Topics
#8
RL Community Team
Rennlist Member
Rennlist Member
I thought Super Sprint had grown up a lot; I used their system on an 81 Sirocco years ago and it absolutely howled inside the car; I would not like a similar system in the turbo.
#9
Rennlist Member
Curious of the details on pricing and shipping? Website is fubared...
#10
RL Community Team
Rennlist Member
Rennlist Member
That is interesting. I have found that nearly every exhaust available for the 996TT, even the stock system, drones at 2200RPM.
The following users liked this post:
Carlo_Carrera (12-12-2019)
#12
RL Community Team
Rennlist Member
Rennlist Member
What else is interesting is that if you look through all the sub-forums it appears every water cooled flat 6 with every exhaust combination also drones around the 2200 RPM range. It's a thing.
#14
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
A few fun facts...
Super Sprint private labeled the TechArt Twin can (with no center balance tube).. This design was copied and brought into the US by many offshore exhaust manufacturers. Fabspeed offers a similar twin can exhaust today.
Just like the original TechArt system it droned like no tomorrow.
Fabspeeds GEN 1 system had cherry bomb "STYLE" mufflers that ran in parallel left bank when to right exhaust tip, the right bank when to the left exhaust tip.
Fabspeeds GEN 2 exhaust was very similar to the above pictured Super Sprint system that is offered today. The unit has One large centered muffler with two inlets and two outlets..
To the OP, get it fitted and post your opinion. The SuperSprint systems are very well built.
Super Sprint private labeled the TechArt Twin can (with no center balance tube).. This design was copied and brought into the US by many offshore exhaust manufacturers. Fabspeed offers a similar twin can exhaust today.
Just like the original TechArt system it droned like no tomorrow.
Fabspeeds GEN 1 system had cherry bomb "STYLE" mufflers that ran in parallel left bank when to right exhaust tip, the right bank when to the left exhaust tip.
Fabspeeds GEN 2 exhaust was very similar to the above pictured Super Sprint system that is offered today. The unit has One large centered muffler with two inlets and two outlets..
To the OP, get it fitted and post your opinion. The SuperSprint systems are very well built.
The following users liked this post:
ipman (12-12-2019)
#15
Fabspeed looks like overseas crap IMO, and there's lots to be read on that.... I've had lots of Supersprint stuff. they also make the exhaust for Hartge and some others I'm sure. It's a great product for sure, but lacking in some overall QC as I've had a few and seen others with cracking around hangers and such. Still a great (albeit $$$) product.