When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey @powdrhound do you happen to have any pics that show where you drilled/tapped the coolant housings for the return?
I'm planning to tap the housing on the driver's side of the engine in the picture attached.
Chris tapped the housing on the top of the engine on the right side, basically just to the right of the manifold you want to use. You can see it here just above the grey -8AN fuel line and to the right of the Deutsch connector.
" target="_blank">
Last edited by powdrhound; 07-06-2022 at 02:54 PM.
Awesome, thanks for the pic. I don't see any separation between the two passages so should be good to use any spot on this upper manifold it seems. Great info!
07-06-2022 | 02:42 PM
