Notices
996 Turbo Forum 1999-2005
Sponsored by:
Sponsored by:

Throttle code P2135 and p0121

Thread Tools
 
Search this Thread
 
Old 07-03-2018, 10:33 PM
  #1  
01996turbo1
Cruisin'
Thread Starter
 
01996turbo1's Avatar
 
Join Date: Jul 2018
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Throttle code P2135 and p0121

Hello Rennlisters,

i have a dilema on a 2001 Porsche 996 turbo, running GT660 EVOMS tune with 1050x injectors, K16 billet turbos,Hitachi Mass Air, Catless Exhaust, intake tubes off Turbos. Car has been pulling codes P2135 and P0121, thought it was Pedal Potentiometer, so had it replaced. Drove home and it still comes back. Not that this is related, but I am also getting codes P0051 and P0151 as well regarding o2 sensor area. Pedal will go into limp mode and open 30 pct on wide open throttle.

Has anyone experienced this, iif so how did you resolve it?

Thanks,

Steve
Old 07-04-2018, 02:11 PM
  #2  
996tt6156R
Instructor
 
996tt6156R's Avatar
 
Join Date: Jan 2013
Posts: 222
Likes: 0
Received 0 Likes on 0 Posts
Default

Clean the throttle body out with electrical cleaner then do the throttle adaption.
Old 07-04-2018, 02:30 PM
  #3  
01996turbo1
Cruisin'
Thread Starter
 
01996turbo1's Avatar
 
Join Date: Jul 2018
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for your reponse will give that a try.
Old 07-04-2018, 02:31 PM
  #4  
Atrox
Drifting
 
Atrox's Avatar
 
Join Date: Nov 2014
Posts: 2,541
Likes: 0
Received 9 Likes on 8 Posts
Default

Unplug maf and drive it. If it’s running better install a new oem Bosch maf.
Old 07-23-2019, 05:46 PM
  #5  
fraazz
AutoX
 
fraazz's Avatar
 
Join Date: May 2017
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Just repaired a 2004 GT3 with the same codes. The wiring harness for the MAF had rubbed through on the power steering pulley causing a slight short. The red/blue wire powers up a lot of components, strange it only threw these two codes.

Fraazz



Quick Reply: Throttle code P2135 and p0121



All times are GMT -3. The time now is 07:37 PM.