Water/meth questions
#1
Rennlist Member
Thread Starter
Water/meth questions
I searches for water/meth kits and it seems like people have their opinion on a multitude of kits. I've narrowed it town to aquamist due to the fail safes, monitoring, etc. I'm trying to find where to buy it, what nozzle to use and what size tank people have? This would be purely for Street. Looking for around 600 wheel. I have new alpha 28 with zona rotor, rods, along with other engine upgrades. Not trying to go crazy but as mentioned around +-600 awhp/tq. I plan on running 51/49 water to meth. Any help appreciated and would love to see pics. Thanks
Last edited by johnkent1212; 09-19-2017 at 08:13 AM.
#5
Drifting
There are a decent amount of people that make reliable safe power at 600 hp or so without the drama of water/met injection. Intake, turbos, fuel injectors, fuel pump, intercoolers, exhaust, and a tune will get you 600 with little fan fare.
#6
Rennlist Member
Thread Starter
Thats great and I saw the above member post, but that wasn't my question. I prefer to add water/meth kit.
Trending Topics
#8
Drifting
The following users liked this post:
SteveJewels (09-20-2021)
#12
Drifting
I wasnt trolling. just offering some guidance, my bad for trying to help. I simply told you to **** off, no point is calling anyone any names. have fun with your project.
#13
Rennlist Member
The misconception with the crowd around here is that a lot of people don’t know the benefits of meth or what it does.
I found a few kits
http://www.tpcracing.com/tpc-racing-...ction-kit.html
http://www.modbargains.com/aem-metha...-911-turbo.htm
https://www.kseriesparts.com/cr/SNO-...RoCqYoQAvD_BwE
i don’t have any personal experience with any of them, but I do know it is a great solution to spending smaller amounts of money as opposed to going full bolt ons. The problem with these cars (not that it’s genuinely a problem) but the first 100 horsepower are relatively cheap. Tune, exhaust, and air filter. The next 100 horsepower is where the bigger money is. Intercoolers, turbos, injectors, another tune. With meth you’ll get the benefit of that additional power.
Just a heads up. Rennlist is SUPER informative about these cars. Some of the people on here are so knowledgeable it’s almost like they built the car from scratch. But on 6speed, that’s where the guys who are pushing the cars further are hanging out. Good luck and update the thread when you get everything situated.
I found a few kits
http://www.tpcracing.com/tpc-racing-...ction-kit.html
http://www.modbargains.com/aem-metha...-911-turbo.htm
https://www.kseriesparts.com/cr/SNO-...RoCqYoQAvD_BwE
i don’t have any personal experience with any of them, but I do know it is a great solution to spending smaller amounts of money as opposed to going full bolt ons. The problem with these cars (not that it’s genuinely a problem) but the first 100 horsepower are relatively cheap. Tune, exhaust, and air filter. The next 100 horsepower is where the bigger money is. Intercoolers, turbos, injectors, another tune. With meth you’ll get the benefit of that additional power.
Just a heads up. Rennlist is SUPER informative about these cars. Some of the people on here are so knowledgeable it’s almost like they built the car from scratch. But on 6speed, that’s where the guys who are pushing the cars further are hanging out. Good luck and update the thread when you get everything situated.
#14
Rennlist Member
I searches for water/meth kits and it seems like people have their opinion on a multitude of kits. I've narrowed it town to aquamist due to the fail safes, monitoring, etc. I'm trying to find where to buy it, what nozzle to use and what size tank people have? This would be purely for Street. Looking for around 600 wheel. I have new alpha 28 with zona rotor, rods, along with other engine upgrades. Not trying to go crazy but as mentioned around +-600 awhp/tq. I plan on running 51/49 water to meth. Any help appreciated and would love to see pics. Thanks
I ask because they eventually need to be refilled and perhaps use a tune that needs to swapped?
Regularly reliable 600whp is available:
https://rennlist.com/forums/996-turb...mw-tune-2.html