When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Great write up. We just supplied a set of Zunsports and the owner asked how to deal with the temp sensor? I will likely install a set on both my 6 and 7 turbos just so I know. Looks like a very nice product.
this it "too" close but only other pic i have. all in all, for the 10 bucks, they look the same as all the ( ahem ) branded ones folks sell for $250/300+. its a cpl bucks of chicken wire mesh, tacked to the underside of the bumper, slats removed is all. problem is, ( as mentioned ) the support piece is visible behind, and since it's already "silver', painting won't help unless you paint the mesh black also.
although i didn't do it for looks per se? i like the look and since i kill bugs fast ( you shoulda seen last spring at dusk! thousands of flying bugs up here! ), and i want/need my rads as free of debris as they can possibly be. even with screens, which i view as a "must have", i'm still scraping bug debris often. again.. form, following function.
Great write up. We just supplied a set of Zunsports and the owner asked how to deal with the temp sensor? I will likely install a set on both my 6 and 7 turbos just so I know. Looks like a very nice product.
There is a rubber bushing where the temp sensor came out from. I just pushed it in, and it sits there pretty comfortable. Other thoughts, would be to zip tie it closer to the crash bar. The sides that peek out through the grilles right now. I do agree its a well built product!