need advice re: CCW 9" and 12" wheel fitment
#1
Rennlist Member
Thread Starter
need advice re: CCW 9" and 12" wheel fitment
Hey guys, have a chance to buy a set of CCW c10's in gt3 offsets with 9" fronts and 12" rears from a forum member. I know that many run this set up, but almost all that do seem to be running track-oriented set ups (i.e., track alignment, lots of camber, r-comp rubber, etc...).
I want them primarily for the street. Does anyone know if these are a good match for any of the readily-available street-biased tires, assuming a relatively "street friendly" alignment and set up?
Just thought I would try to confirm before I pull the trigger. Thanks in advance! Don't want to buy them only to find out that they rub like crazy with non-r comp tires or a street alignment. Scott.
I want them primarily for the street. Does anyone know if these are a good match for any of the readily-available street-biased tires, assuming a relatively "street friendly" alignment and set up?
Just thought I would try to confirm before I pull the trigger. Thanks in advance! Don't want to buy them only to find out that they rub like crazy with non-r comp tires or a street alignment. Scott.
#2
IMHO, avoid 3xx sized 18's for street use....tire cost/availability is poor vs 295's/11's....GT2 costs...
IMHO, again, go 997 '3 sizes
IMHO, again, go 997 '3 sizes