Mounting aftermarket RS spoiler for 996 GT3
#1
Rennlist Member
Thread Starter
Mounting aftermarket RS spoiler for 996 GT3
Looking at mounting an aftermarket RS spoiler (raw CF, no fittings supplied) and trying to figure out how to purchase and mount the bracket to attach to the stock uprights. As everything aftermarket, it's a PIA!
Pic attached is of the standard GT3 wing mount. I understand the aluminum bracket pictured cannot be sourced separately from Porsche?
The spoiler I am looking at has the contoured recess in the wing itself, but no mounting hardware.
Anyone make the curved L-bracket that I can mount up? I don't want to unrivet the bracket from my stock wing for obvious reasons.
Someone must have dealt with this before - aftermarket source? Have something fabricated? F it altogether?
Thanks in advance for any leads.
Cheers
Matt
Pic attached is of the standard GT3 wing mount. I understand the aluminum bracket pictured cannot be sourced separately from Porsche?
The spoiler I am looking at has the contoured recess in the wing itself, but no mounting hardware.
Anyone make the curved L-bracket that I can mount up? I don't want to unrivet the bracket from my stock wing for obvious reasons.
Someone must have dealt with this before - aftermarket source? Have something fabricated? F it altogether?
Thanks in advance for any leads.
Cheers
Matt
#5
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#6
Instructor
Join Date: Aug 2005
Location: Richmond, VA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Is this the one you are talking about? Price is very interesting if it bolts right up.
http://www.albertweb.de/fahrzeugkata...hne-haube.html
http://www.albertweb.de/fahrzeugkata...hne-haube.html
#7
Rennlist Member
Thread Starter
I'm reconsidering my plan to locate mounting brackets.
We'll see, but I can't yet confirm the part builder thought through a robust mounting base beneath the CF skin. You can 'attach' anything - but I want to ensure it's really solid (for obvious reasons).
We'll see, but I can't yet confirm the part builder thought through a robust mounting base beneath the CF skin. You can 'attach' anything - but I want to ensure it's really solid (for obvious reasons).