Interest in Joe Toth splitter for OEM 996 GT2
#50
Good news guys. I met a gentleman this afternoon who will let me use his car to design and prototype the GT2 splitter. Tentatively scheduled to start next weekend. Please let me know how many are still interested. Thanks Joe
#51
#53
awesome Joe!...pricing?
#57
Hello gentlemen, quick update. The work has started on the GT2 splitter. I almost scared myself off doing this when I looked at the car on Saturday. The molding and trimming is going to be a nightmare around all the tabs that clip into the bumper. Then I thought if it were easy everyone would be doing it.
Is there any interest in canards for this car? Thought while I'm doing the design I would do those as well if there is sufficient interest. The shape of the bumper is dramatically different from the other canards I have and would be a poor fit.
Can I please have a show of hands for interest in the splitter and or canards.
Thanks for the interest guys.
Joe
tei@telus.net
Is there any interest in canards for this car? Thought while I'm doing the design I would do those as well if there is sufficient interest. The shape of the bumper is dramatically different from the other canards I have and would be a poor fit.
Can I please have a show of hands for interest in the splitter and or canards.
Thanks for the interest guys.
Joe
tei@telus.net
#58
I'm in for Splitter for sure, Canards as well if they can go on w/o drilling.
I'll try to round up some other GT2 folks I know that might be interested on the other forums as well.
Thanks for not forgetting about us
I'll try to round up some other GT2 folks I know that might be interested on the other forums as well.
Thanks for not forgetting about us