Very nice I would like to incorporate a better unit into our build if anyone comes across one.
|
Bumping an old thread here as my search didn't yield anything newer. Which suppliers currently offer the ram air scoop for the 996 GT3? I called Getty and got no answer. I also emailed them and have yet to receive a reply. I would prefer not to use a part that is known to need extensive modification to make it fit, so FVD is out.
|
You might check eBay in Germany, ebay.de. Probably called a Cup Hutze or RS Hutze.
|
Originally Posted by rebrewer
(Post 13478241)
You might check eBay in Germany, ebay.de. Probably called a Cup Hutze or RS Hutze.
If anyone else knows of a US vendor, please let me know. I imported my RS/Manthey wing from Germany, and shipping/import duties added a bit of additional annoyance. Will go that route again if it's not possible to buy a quality part that's already in the US. |
Here's one, and they will ship to the U.S. Looks like the part number is: 99651295794G2X
http://www.ebay.de/itm/NEU-ORIG-Pors...item25bf995aea Searched on the part number 99651295794G2X and there is at least one source in the US, albeit at nearly twice the price. |
I ordered mine from FVD this year. I had my body shop prep/paint and I installed it with double sided tape instead of screwing it to the decklid. The fit is great and it is stuck on there properly at many 170mph+ runs. My only problem was the horrible service I received from FVD. Their website said it was available and it actually took 3 months to get. Their communication was bad with many of my e-mails asking for updates ignored. Overall I'm happy with the part but will never order or recommend anybody order anything from FVD.
https://cimg1.ibsrv.net/gimg/rennlis...7a389a4931.jpg https://cimg2.ibsrv.net/gimg/rennlis...1ab61b6f05.jpg https://cimg7.ibsrv.net/gimg/rennlis...5109b0f0df.jpg |
Let me know if you want to sell it anytime soon ;) ;)
|
Originally Posted by rebrewer
(Post 13478292)
Here's one, and they will ship to the U.S. Looks like the part number is: 99651295794G2X
http://www.ebay.de/itm/NEU-ORIG-Pors...item25bf995aea Searched on the part number 99651295794G2X and there is at least one source in the US, albeit at nearly twice the price. |
Originally Posted by LuisGT3
(Post 13479210)
I ordered mine from FVD this year. I had my body shop prep/paint and I installed it with double sided tape instead of screwing it to the decklid. The fit is great and it is stuck on there properly at many 170mph+ runs. My only problem was the horrible service I received from FVD. Their website said it was available and it actually took 3 months to get. Their communication was bad with many of my e-mails asking for updates ignored. Overall I'm happy with the part but will never order or recommend anybody order anything from FVD.
https://cimg1.ibsrv.net/gimg/rennlis...7a389a4931.jpg https://cimg2.ibsrv.net/gimg/rennlis...1ab61b6f05.jpg https://cimg7.ibsrv.net/gimg/rennlis...5109b0f0df.jpg |
We installed it with 3M double sided tape.
|
Originally Posted by LuisGT3
(Post 13485269)
We installed it with 3M double sided tape.
|
Whichever one the stickiest is. :)
|
I have one from cargraphic which I installed using 3m tape also.
I am pretty sure this type of air scoop works. When we were tuning my ecu because of the cargraphic exhaust, we had to retune a few times on the road to compensate for the added air when car reaches 200 kmh or 130+mph. This was verified during with my Air fuel ratio meter, engine goes a bit lean at those speeds so we had to add fuel while it doesn't during the dyno tuning process. |
Love the ram air. On the list.
Use the 3m 5962 tape. Used it to install a cf roof and it is working great. http://www.uline.com/Product/Detail/...OrderHistory=Y https://cimg6.ibsrv.net/gimg/rennlis...10c160385.jpeg |
You only used 3M double-sided tape to install your roof?
|
All times are GMT -3. The time now is 09:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands