TorqueSolution Motor Mounts and Transmission Mount
#1
Rennlist Member
Thread Starter
TorqueSolution Motor Mounts and Transmission Mount
Just had these installed based on a recommendation from a buddy with 996 GT2 who got them a few weeks back. So far so good, really big improvement in shifting accuracy particularly under load and a nice increase in the rear end feeling a bit more planted when under throttle.
It was the right time too since my existing tranny mount had a nice little tear in it, the motor mounts I figured to just do for fun. I've done motor mounts in a few of my past rides and disliked the extra vibration they typically cause, but the difference with these installed is very minimal so it's all good.
It was the right time too since my existing tranny mount had a nice little tear in it, the motor mounts I figured to just do for fun. I've done motor mounts in a few of my past rides and disliked the extra vibration they typically cause, but the difference with these installed is very minimal so it's all good.
#4
Former Vendor
They make dog bones, toe links and thrust arms as well. Orbit racing has been using them on some heavily tracked cars and i have them on mine with no issues at all..
Trending Topics
#8
Nordschleife Master
So if I parked my rig at Orbit for a few months this winter, you could drop the engine and do the fittings?
Care to PM or e-mail me a guesstimate? If that would work, of course...
Care to PM or e-mail me a guesstimate? If that would work, of course...