Where can I find OEM splitter?
#16
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just got mine last week and installed it over the weekend. Ordered it from FVD for $154!!! Shipping was about a $100 but still less than $400 for the OEM street version.
http://shop.fvd.de/us/en/Porsche-0/9...Cup_02-04.html
http://shop.fvd.de/us/en/Porsche-0/9...Cup_02-04.html
#17
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just got mine last week and installed it over the weekend. Ordered it from FVD for $154!!! Shipping was about a $100 but still less than $400 for the OEM street version.
http://shop.fvd.de/us/en/Porsche-0/9...Cup_02-04.html
http://shop.fvd.de/us/en/Porsche-0/9...Cup_02-04.html
#20
Instructor
Join Date: Nov 2009
Location: Sunny London,UK
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just got mine last week and installed it over the weekend. Ordered it from FVD for $154!!! Shipping was about a $100 but still less than $400 for the OEM street version.
http://shop.fvd.de/us/en/Porsche-0/9...Cup_02-04.html
http://shop.fvd.de/us/en/Porsche-0/9...Cup_02-04.html
......as these are poly pretty much indestructible, have twice caught mine on rough terrain and ripped the front part completely off bending it back on itself whilst still driving along, with just the sides still attached
had to reverse to unfold it out from under the vehicle, still totally intact and re attach it.
#23
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
didnt have a chance to call sunset today, but emailed their request line. i requested availability and price on oem and cup. what is the difference between the two? larger? poly or a composite plastic?
i'll check IMGT3 tomorrow
thanks all!
i'll check IMGT3 tomorrow
thanks all!
#24
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
hello
may i ask a question about these splitters. does any body have a good way of attaching this to the car so that it stays on. i have used the push pin things and also i used the screw type pins. i finally resorted to using the push pins and duct tape to hold them in place i hope somebody has a more permanent solution thanks
may i ask a question about these splitters. does any body have a good way of attaching this to the car so that it stays on. i have used the push pin things and also i used the screw type pins. i finally resorted to using the push pins and duct tape to hold them in place i hope somebody has a more permanent solution thanks
#25
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
hello
may i ask a question about these splitters. does any body have a good way of attaching this to the car so that it stays on. i have used the push pin things and also i used the screw type pins. i finally resorted to using the push pins and duct tape to hold them in place i hope somebody has a more permanent solution thanks
may i ask a question about these splitters. does any body have a good way of attaching this to the car so that it stays on. i have used the push pin things and also i used the screw type pins. i finally resorted to using the push pins and duct tape to hold them in place i hope somebody has a more permanent solution thanks
#26
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
hello
may i ask a question about these splitters. does any body have a good way of attaching this to the car so that it stays on. i have used the push pin things and also i used the screw type pins. i finally resorted to using the push pins and duct tape to hold them in place i hope somebody has a more permanent solution thanks
may i ask a question about these splitters. does any body have a good way of attaching this to the car so that it stays on. i have used the push pin things and also i used the screw type pins. i finally resorted to using the push pins and duct tape to hold them in place i hope somebody has a more permanent solution thanks
Like MJP911said, the stock push pins and ds tape. Lots of other discussion in that thread about using a a bead of silicone as well.
IMO, you still want it to break away without much drama if you catch it on something, so don't go overboard unless you also want to possibly damage your bumper (not cheap to replace and paint).
#27
Instructor
Join Date: Nov 2009
Location: Sunny London,UK
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
(link)
Like MJP911said, the stock push pins and ds tape. Lots of other discussion in that thread about using a a bead of silicone as well.
IMO, you still want it to break away without much drama if you catch it on something, so don't go overboard unless you also want to possibly damage your bumper (not cheap to replace and paint).
Like MJP911said, the stock push pins and ds tape. Lots of other discussion in that thread about using a a bead of silicone as well.
IMO, you still want it to break away without much drama if you catch it on something, so don't go overboard unless you also want to possibly damage your bumper (not cheap to replace and paint).
roger that......defo don't use bolts, it'll cost u big time in front damage, splitter must tear away if caught badly.
so its a packet of scrivets part # 999 507 427 40 and 3M Scotch double sided tape.
#28
Rennlist Member
Join Date: Sep 2006
Location: Vancouver, BC, Canada
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I often remove the splitter when driving on the street so I don't use the 3M double sided mounting tape. Too much of a pita to install/remove for track days. I've opted for the "classy" black duct tape when going on the track.
I cover the seam between the splitter and the bumper with tape and add an additional few vertical pieces to help make it stay in place.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)