correct throw-out bearing for lwfw mod
#1
Rennlist Member
Thread Starter
Join Date: Apr 2007
Location: san diego
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
correct throw-out bearing for lwfw mod
need help: does anybody know if the RS lwfw mod for the 2004 GT3 requires a different throw-out bearing than the stock bearing? I have gone thru 2 stock bearings in a short period of time; the first suffered a cracked bracket, the second is still in car but beginning to act up and i am about to pull motor to inspect/replace. This is with no clutch abuse of any sort. I don't want to use the same parts if there is a better set up for the car I have heard that the lwfw bearing has a different part number....? thanks for any suggestions
#7
Rennlist Member
That part number is the pilot bearing for the input shaft into the back of the crankshaft. The throw out bearing for the LWF is 944 116 080 00. This is not the stock bearing that came with the dual mass flywheel setup.
Trending Topics
#10
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
someone needs to fix the english language.....
#11
Rennlist Member
Thread Starter
Join Date: Apr 2007
Location: san diego
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
#12
Admin
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#15
Rennlist Member
Thread Starter
Join Date: Apr 2007
Location: san diego
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
thanks very much, knew there must be something amiss in my setup