Insalled the 19" Wheels... Real Tight... Now What?
#16
My car was on 19" tech art wheels when i got it,i ran it for a while with them on 235/305 cups and it was ok but they ripped my under arch plastics to pieces on track from catching.
It felt ok though and i had no problems with abs.
It did look good,but the more it turned to just a track car i decided to put 18's on and it is better now on them,cheers
It felt ok though and i had no problems with abs.
It did look good,but the more it turned to just a track car i decided to put 18's on and it is better now on them,cheers
#17
Nordschleife Master
Thread Starter
- 18" = $1,208
- 19" = $1,814
My car was on 19" tech art wheels when i got it,i ran it for a while with them on 235/305 cups and it was ok but they ripped my under arch plastics to pieces on track from catching.
It felt ok though and i had no problems with abs.
It did look good,but the more it turned to just a track car i decided to put 18's on and it is better now on them,cheers
It felt ok though and i had no problems with abs.
It did look good,but the more it turned to just a track car i decided to put 18's on and it is better now on them,cheers
BTW, my first multi-quote
#18
Nordschleife Master
Thread Starter
#20
Rennlist Member
Yes, that sums it up nicely. It's not even about performance at this point, but about physical fitment.
I assumed the 19s would work since that is the setup on the 7 GT3 and also that there would be more tire options going forward, but at what cost/hassle.
I've e-mailed Damon @ Tirerack to ask about some Alleggeritas and will be on the lookout for some used CCWs
I assumed the 19s would work since that is the setup on the 7 GT3 and also that there would be more tire options going forward, but at what cost/hassle.
I've e-mailed Damon @ Tirerack to ask about some Alleggeritas and will be on the lookout for some used CCWs
#21
Rennlist Member
Join Date: Sep 2006
Location: Vancouver, BC, Canada
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
#22
Nordschleife Master
Thread Starter
#24
Rennlist Member
Join Date: Sep 2006
Location: Vancouver, BC, Canada
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
#26
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
very nice.
8.5 and 11
my stripper runs 9.5 and 12
so these need to go.
and at 2000, these 3pc wheels are pretty damn cheap.
#27
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#28
Rennlist Member
Join Date: Sep 2006
Location: Vancouver, BC, Canada
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
#29
Alan scooped the 3rd set from a fellow I know in Alberta..... so I had no choice but to pick these ones up. Now I need to get rid of the RUF 19s and two sets of Cayman 19s (leaving me two) and then get a custom set of Fikses built for the 996....
Cheers
Cheers