+80lb weight loss for the track hounds...
10-31-2023, 11:00 AM
#46
Rennlist Member
I just contacted them. They are still available to order. They couldn't confirm whether their doors are the same as the ones in this thread (I sent them the link here), and they also said the doors they sell do not have TUV papers.
I would highly doubt there are more than 1 manufacturer for these doors with all the openings and holes to fit the OEM interior parts. My bet is they are from the same manufacturer.
I saw your build thread. You still like these doors? Any quirks after using them for so long? Do you install the OEM side crash beam or is that not removable from the OEM doors?
I would highly doubt there are more than 1 manufacturer for these doors with all the openings and holes to fit the OEM interior parts. My bet is they are from the same manufacturer.
I saw your build thread. You still like these doors? Any quirks after using them for so long? Do you install the OEM side crash beam or is that not removable from the OEM doors?
So far enjoy them, granted the car is still not drivable yet. The OEM crash beam does not carry over to the Manthey doors, however the air bags do. There are several others that have been running the doors on their cars for several years, vs mine that has not seen a mile since the doors being installed. Nicolas has on his GT3 has been running them for some time. Perhaps he will chime in.
The following users liked this post:
changster123 (10-31-2023)
10-31-2023, 11:14 AM
#47
Rennlist Member
Thread Starter
The following users liked this post:
GT2rainge (10-31-2023)
11-01-2023, 04:51 AM
#49
There is this company in France. Their specs match to those FVD doors, so might be they are the actual manufacturer. I nearly bought these street/sport doors 4 years ago.. The price for 2 doors was 3439 € plus VAT back then. Might be worth to check them out?
http://www.dmoris-styling.com/eng/li...---photos.html
http://www.dmoris-styling.com/eng/li...---photos.html
The following users liked this post:
changster123 (11-02-2023)
11-02-2023, 09:29 AM
#50
Rennlist Member
The original 996 GT3 RS hood was made in France. There is a tag on it under the bonnet.
The following users liked this post:
changster123 (11-02-2023)
11-02-2023, 02:24 PM
#51
Rennlist Member
Thread Starter
The following users liked this post:
changster123 (11-02-2023)