When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Beautiful look! Can you tell me if that bumper works with the standard C2 radiator ducts, or do you need to purchase new ones?
Hi, thankyou !!
I didn’t actually see the kit prior to it being fitted (my body shop purchased it on my behalf) but my understanding was that everything required to fit the Aerokit bumper to the car is included in the kit, be it the smaller splitter, radiator ducts etc.
The bumper install looks to have used the original centre radiator blanking plate, so I suspect the original side radiator ducts are most likely reused too. The only difference between the C2 and the GT3 radiators is their size (both thickness and height/width)
I hope that helps !
The 996.1 White Aero car with that plate belongs to some realtor in NYC would bought it from Ryan Friedman...I can't remember his Instagram handle at the moment.
Be careful with that front splitter. I have the same and wanted to replace it. They are like 700 bucks now for a little piece of plastic that used to be 150 bucks shipped.
Took it to Litchfield Distillery and Kent Falls Brewery today with a group of friends. Getting close to the last drive of the year. The hill towns have already put sand/salt out.
Hey Guys, Just figured I'd share a few recent pics of my 996. Insta is jerrym1993. I've been looking for a set of BBS E28/E88 or Porsche Motorsport Cup Car wheels if anyone has any leads on a set.
08-12-2023, 03:31 AM
