Delreycustoms 996 Porsche Depo PDK Gen 2 Lights Audio Upgrades
#46
Former Vendor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
you don't have to do the 8 inch screen we can always go with a 7 inch screen with the porsche logo dash kit which is a clean look as well with the boot screen keep it more of an oem feel
#47
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
About the noise, what are some things you can do? I have what I think is a very short solid ground for both my amp and head unit but I still get a very slight whine that can only be heard when the radio is muted. The pitch changes with the RPMs.
#48
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Oh yay, more crappy looking headlights crammed full of tacky LEDs.
What is so difficult about the idea of creating an aftermarket headlight/tail light for a car that looks like it could be OEM? Is it really that hard to design something that compliments and modernizes the styling of the car instead of looking like it came from the clearance isle at Pep Boys? Good Lord.
What is so difficult about the idea of creating an aftermarket headlight/tail light for a car that looks like it could be OEM? Is it really that hard to design something that compliments and modernizes the styling of the car instead of looking like it came from the clearance isle at Pep Boys? Good Lord.
#49
Former Vendor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
1. it isolates the rca grounds inside the EQ
2. It allows the Rca to be balanced line
3. you can fine tune the input gain to eliminate the wind all together and adjust the output gain for good volume and signal to the amp.
you can try copper coated tape around the wires that pass by the fuse panel in some cases this will shield the rca or speaker wires to eliminate the interference
rca filters can increase the noise in my experience
also i have found if you run the amp turn on thru a relay it will also help eliminate this noise.
#51
Former Vendor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
yes out of the box the lights tie in to the parking lights For the White LED.
Now if you want them on all the time like a AUTO DRL you just have to add a relay and power to the parking lights similar to our 997 DTR Auto thread
The car stock has no DTR feature. The lights are plug and play on 996 MK1 and the Boxster
Now if you want them on all the time like a AUTO DRL you just have to add a relay and power to the parking lights similar to our 997 DTR Auto thread
The car stock has no DTR feature. The lights are plug and play on 996 MK1 and the Boxster
#52
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Del Rey,
I want to put led lights on my 2001 C2. It looks like even the OEM ones would fit in the scoop, but not sure. Do you have something like this and how hard is it to install?
I want to put led lights on my 2001 C2. It looks like even the OEM ones would fit in the scoop, but not sure. Do you have something like this and how hard is it to install?