Missing Cab roll bar part
10-15-2012, 04:31 PM
Rennlist Member
Thread Starter
Join Date: Jan 2012
Location: Greenville, NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Missing Cab roll bar part
There is a part missing in picture 1 of the access port to cab roll bar reset. Compart picture 1 to picture 2. What is missing and can it be repaired?
10-15-2012, 05:45 PM
Instructor
Join Date: Mar 2011
Location: San Jose, CA
Posts: 190
Look in the recent post "oval inserts". The answer was given there
10-15-2012, 06:01 PM
Rennlist Member
Thread Starter
Join Date: Jan 2012
Location: Greenville, NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
No, I have dealt with the inserts. This is something below the inserts. Thanks, anyway. J
10-15-2012, 06:15 PM
Track Day
Join Date: Mar 2012
Location: Sweden
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
turn with the tool and look if the mounting divice points at the same direction... red arrow open, green closed.
10-15-2012, 06:21 PM
Track Day
Join Date: Mar 2012
Location: Sweden
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, those are on the hardtop. Anyway, looks like the mounting is half closed.
10-15-2012, 07:01 PM
Instructor
Join Date: Mar 2011
Location: San Jose, CA
Posts: 190
Sorry bud, wasn't trying to be a smartass, thought you were different person looking for same info.