First Dyno run with custom SC-Problem #'s
#46
Three Wheelin'
This isn't far from stock specs IIRC, in fact might be just about spot on (at idle mind you). I'm almost wondering if the resistor is causing the problems, or there is a problem with intake.
If I remember right, there was a highly technical discussion about AFR, MAF resistor, and intake size on renntech.org which included 1999porshce911's advice. I'll try to dig this up in case you haven't read it.
It might have been this one???
http://www.renntech.org/forums/topic...el-air-mixture
You've read it right?
LOL on the donations, you're the one that has shelled out all those bones for a custom FI setup!
If I remember right, there was a highly technical discussion about AFR, MAF resistor, and intake size on renntech.org which included 1999porshce911's advice. I'll try to dig this up in case you haven't read it.
It might have been this one???
http://www.renntech.org/forums/topic...el-air-mixture
You've read it right?
LOL on the donations, you're the one that has shelled out all those bones for a custom FI setup!
#47
Burning Brakes
Thread Starter
Join Date: Jan 2005
Location: Phoenix, AZ
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
I spoke with vf and they said they have had a 997s at 475 with the same kit but on race gas. I know it has a few more liters than us but...
They use 42lb bosch green injectors also. I asked about a 4-450 hp mark and they replied the oem pump can't handle that flow.
Is there not a GIAC dealer near you with a dyno? I know they have made plenty of custom files for Audi guys with custom setups.
I just find it weird you have to 'fool' the maf for a tune.
Sorry not going to read through 12 pages to see what size pulley you used but I'm assuming 3.25" since that is what the vf kit uses for 6psi.
I will be adding to the kit to run atleast 400 whp. I have all winter to gather my parts I will be using.
There are plenty of tuners and dyno tuners in my area with ones I am friends with as well so not worried as much. If I were you I would mimick as much as possible vf's kit to get it running right then tweak it to your liking since you are having major issues.
They use 42lb bosch green injectors also. I asked about a 4-450 hp mark and they replied the oem pump can't handle that flow.
Is there not a GIAC dealer near you with a dyno? I know they have made plenty of custom files for Audi guys with custom setups.
I just find it weird you have to 'fool' the maf for a tune.
Sorry not going to read through 12 pages to see what size pulley you used but I'm assuming 3.25" since that is what the vf kit uses for 6psi.
I will be adding to the kit to run atleast 400 whp. I have all winter to gather my parts I will be using.
There are plenty of tuners and dyno tuners in my area with ones I am friends with as well so not worried as much. If I were you I would mimick as much as possible vf's kit to get it running right then tweak it to your liking since you are having major issues.
some pics of my build
http://www.webbspot.com/porsche/
Forgot to mention the intake has changed on website and has not been updated in years sorry.
#48
Burning Brakes
Thread Starter
Join Date: Jan 2005
Location: Phoenix, AZ
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
This isn't far from stock specs IIRC, in fact might be just about spot on (at idle mind you). I'm almost wondering if the resistor is causing the problems, or there is a problem with intake.
If I remember right, there was a highly technical discussion about AFR, MAF resistor, and intake size on renntech.org which included 1999porshce911's advice. I'll try to dig this up in case you haven't read it.
It might have been this one???
http://www.renntech.org/forums/topic...el-air-mixture
You've read it right?
LOL on the donations, you're the one that has shelled out all those bones for a custom FI setup!
If I remember right, there was a highly technical discussion about AFR, MAF resistor, and intake size on renntech.org which included 1999porshce911's advice. I'll try to dig this up in case you haven't read it.
It might have been this one???
http://www.renntech.org/forums/topic...el-air-mixture
You've read it right?
LOL on the donations, you're the one that has shelled out all those bones for a custom FI setup!