FS feeler: 19 inch champions rg5b local pickup Miami
07-18-2011, 02:44 PM
#1
Rennlist Member
Thread Starter
FS feeler: 19 inch champions rg5b local pickup Miami
I am thinking about selling my 19inch Champion Monolite RG5B's w/ Michelin PS2 N1's. They are real champion and not cheap knock offs. They come with the original Champion center cap.
Offset: 19x8.5 front, 19x11 rear
I used them to cruise while in Texas, but now that I am in Miami and going to the track more often and I don't plan on putting them back on.
They are in perfect condition, just one very small curb rash on one rims, but very small. They are mounted on Michelin PS2 with some thread left on them but not much.
They are perfect for narrow body 996. They fit flush on the wheel arches, do not extend outside fender.
The car needs to be lowered or there will be some rubbing in the front fender liner at full wheel lock. When the car is lowered the wheel arches match better.
For those who wonder how the drive is on 19 inch, from personal experience it is almost impossible to tell the difference when those wheels are on, or when I have my 18 inch on.
they would be a pain to ship (expensive) so I want to see if there would be any taker for a pickup around Miami, FL.
I will sell them for what I paid for: $2400.
Phil
Offset: 19x8.5 front, 19x11 rear
I used them to cruise while in Texas, but now that I am in Miami and going to the track more often and I don't plan on putting them back on.
They are in perfect condition, just one very small curb rash on one rims, but very small. They are mounted on Michelin PS2 with some thread left on them but not much.
They are perfect for narrow body 996. They fit flush on the wheel arches, do not extend outside fender.
The car needs to be lowered or there will be some rubbing in the front fender liner at full wheel lock. When the car is lowered the wheel arches match better.
For those who wonder how the drive is on 19 inch, from personal experience it is almost impossible to tell the difference when those wheels are on, or when I have my 18 inch on.
they would be a pain to ship (expensive) so I want to see if there would be any taker for a pickup around Miami, FL.
I will sell them for what I paid for: $2400.
Phil
07-18-2011, 09:06 PM
#3
Rennlist Member
Thread Starter
yes with the US m030 it would rub at full wheel lock. I think some said that you can carve the fender liner by warming them up with a heat gun and push them where it rubs. It only need like an inch more on a 5 inch diameter area.
Phil.
Phil.
02-21-2014, 06:56 PM
#4
Rennlist Member
Thread Starter
these have seen no love for the past years, so I am putting them back for sale $2,000
local pickup widely preferred, if not packing and shipping to buyer expense, certainly $200-$300
local pickup widely preferred, if not packing and shipping to buyer expense, certainly $200-$300
02-21-2014, 10:48 PM
#6
Rennlist Member
Thread Starter
front offset 19x8x45
rear offset 19x11x68
the wheels are made for narrow body cars, but will fit the wide body (C4S, turbo) as well with spacer.
see pictures here:
https://www.dropbox.com/sh/2wuwn968z7jyfcf/s6UtGNgCL4
rear offset 19x11x68
the wheels are made for narrow body cars, but will fit the wide body (C4S, turbo) as well with spacer.
see pictures here:
https://www.dropbox.com/sh/2wuwn968z7jyfcf/s6UtGNgCL4
Trending Topics
08-22-2014, 02:51 PM
#10
Rocky Mountain High
Rennlist Member
Rennlist Member
Nice looking wheels!
