Brake Fluid Reservoire
#16
Nordschleife Master
No torque specific number. Tighten by hand and then a slight tightening to makes sure it is seated. It doesn't need to be as tight as you can get as the valve itself just just pushed down a ball valve that closes the line. Once it's closed, fluid stops running through the bleeder.
#21
Nordschleife Master
Don't regret asking that. There is a bleeder nipple for the clutch on top of the case. There is a DIY with pics over on Renntech.org that shows it. I've also attached it for you.
#23
Nordschleife Master
Aaron, thank you for the kind words. It is my pleasure. Believe it or not, I actually enjoy helping out. Just ask the long list of users that frequent my garage