Clear Bra Installer in Raleigh, NC
#1
Burning Brakes
Thread Starter
Clear Bra Installer in Raleigh, NC
I'm finally having a clear bra installed, but need the name/location of a trustworthy service provider in the Raleigh/Cary/Apex area.
Also, if you can share cost, time to install, and product recos (anything other than 3M?), I'd appreciate it. Some clear bras seem to have a lot less shine to the surface, and a lot more visible texture - not appealling.
The only existing threads I could find on this topic were 4-5 years old.
Thanks in advance for your help/advice.
Bob
Also, if you can share cost, time to install, and product recos (anything other than 3M?), I'd appreciate it. Some clear bras seem to have a lot less shine to the surface, and a lot more visible texture - not appealling.
The only existing threads I could find on this topic were 4-5 years old.
Thanks in advance for your help/advice.
Bob
#2
Contact Pete @ TVP Auto
http://tvpauto.com/
Did my motorcycle as a full custom job and did the C4S impeccably. He has a shop in Cary. Good guy; very talented.
Ballpark, $400ish, but depends of course on what you want done
Bumper
Headlights
Hood ¼, ½, full
Mirrors
Rear quarters
etc
etc
HTH
http://tvpauto.com/
Did my motorcycle as a full custom job and did the C4S impeccably. He has a shop in Cary. Good guy; very talented.
Ballpark, $400ish, but depends of course on what you want done
Bumper
Headlights
Hood ¼, ½, full
Mirrors
Rear quarters
etc
etc
HTH
#3
Drifting
Contact Pete @ TVP Auto
http://tvpauto.com/
Did my motorcycle as a full custom job and did the C4S impeccably. He has a shop in Cary. Good guy; very talented.
http://tvpauto.com/
Did my motorcycle as a full custom job and did the C4S impeccably. He has a shop in Cary. Good guy; very talented.
#6
Burning Brakes
Thread Starter
My Porsche is now in the hands of Pete at TVP. Estimated $650 for front bumper, headlights, partial hood, mirrors.
I'll update with a post when the car is back from TVP at 3pm.
I'll update with a post when the car is back from TVP at 3pm.
Trending Topics
#11
Burning Brakes
Thread Starter
Sorry for the delay - I had to take some fresh pictures of my 996. You really can't see the edge of the clear bra on the hood or front bumper unless you look closely.
However, the mirror bras have a crease that won't stay attached to the car (see photo). It's in the same spot on both mirrors. I'l have to ask Pete at TVP how to remedy this situation.
Bob
However, the mirror bras have a crease that won't stay attached to the car (see photo). It's in the same spot on both mirrors. I'l have to ask Pete at TVP how to remedy this situation.
Bob