Cup holders integrated into the center console
#1
Rennlist Member
Thread Starter
Cup holders integrated into the center console
I had an extra center console (or two) laying around from an ebay purchase (wanted some back up interior pieces for some custom painting that I was going to do). After having removed the stock console to paint it I got to thinking that there might be room to put a couple of cup holders into the console. So one day I started hacking a console up and this is what I came up with (patent pending). I have enough consoles to make at least 10 more, but wanted to see what kind of interest there is out there for this. It works very well and fits 20oz bottles. Feedback welcome.
Thanks
Keith
Thanks
Keith
#4
Rennlist Member
Thread Starter
#5
Nordschleife Master
Great craftsmanship!
FYI.....the console for all 986 and 996 cars is the same. The only difference is the coupe has a slightly different rear side panel snap on piece and an extra rear trim piece but the console is identical.
FYI.....the console for all 986 and 996 cars is the same. The only difference is the coupe has a slightly different rear side panel snap on piece and an extra rear trim piece but the console is identical.
Trending Topics
#8
Drifting
May be so, but I've got a tip and heated seats, so I don't think this would work in my car. I have pop-out cupholders already, but these look perfect, like what Porsche should have done in the first place.
#11
Rocky Mountain High
Rennlist Member
Rennlist Member
Looks great.