New console and Instrument bezel
03-10-2008, 01:01 AM
#1
Super Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 1998
Location: Northern New Jersey
Posts: 16,142
Likes: 0
Received 23 Likes
on
19 Posts
New console and Instrument bezel
Trying to dress up my kinda bland interior...
New Arctic silver Console from Bumperplugs.com (Eric is a pleasure to deal with and quality is first rate!)
Also added the Alumalook instrument bezel (Thanks kilrgt)
I have a set of Aluminum gauge rings on order and would like to get the hazard and ignition surrounds in Alumalook..and who knows what else!
New Arctic silver Console from Bumperplugs.com (Eric is a pleasure to deal with and quality is first rate!)
Also added the Alumalook instrument bezel (Thanks kilrgt)
I have a set of Aluminum gauge rings on order and would like to get the hazard and ignition surrounds in Alumalook..and who knows what else!
03-10-2008, 03:19 PM
#5
Super Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 1998
Location: Northern New Jersey
Posts: 16,142
Likes: 0
Received 23 Likes
on
19 Posts
Not a huge fan of the peddles...
I'm sure I will think of some other stuff to blow some cash on
It's amazing how boring the stock interior is, I am definitely a "less is more" kind guy but the 996 just begs for a better interior!
Trending Topics
03-10-2008, 08:47 PM
#8
Instructor
Join Date: Dec 2007
Location: South Carolina
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Nice job that looks great! I want to add the same shifter, actually I like the stock if I could just add the boot and trim ring.
Where did you get the shifter and gauge rings? I got my rings from DPS and they look like crap. I want to replace them one day if I can get them off.
+1 on Eric, I drove over to his shop and got my side markers and silver hood crest from him
Where did you get the shifter and gauge rings? I got my rings from DPS and they look like crap. I want to replace them one day if I can get them off.
+1 on Eric, I drove over to his shop and got my side markers and silver hood crest from him
03-10-2008, 09:04 PM
#12
Super Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 1998
Location: Northern New Jersey
Posts: 16,142
Likes: 0
Received 23 Likes
on
19 Posts
Nice job that looks great! I want to add the same shifter, actually I like the stock if I could just add the boot and trim ring.
Where did you get the shifter and gauge rings? I got my rings from DPS and they look like crap. I want to replace them one day if I can get them off.
+1 on Eric, I drove over to his shop and got my side markers and silver hood crest from him
Where did you get the shifter and gauge rings? I got my rings from DPS and they look like crap. I want to replace them one day if I can get them off.
+1 on Eric, I drove over to his shop and got my side markers and silver hood crest from him
I was going to buy the gauge rings for eagleday they for 129, they are made by NR but I got them right off NR's site for 99 bucks.
If the quality is not good they will go back, I had the factory ones in my 986S and they looked awesome. I just dont know who has the best quality ones. Ebay is always a crapshoot.
03-10-2008, 09:22 PM
#13
Rennlist Member
Love the look, I'm in the middle of doing mine as well . Still putting the center console back together, but here are some random pics. The gauge cluster is just sitting in place (thinking about replacing the bulbs before I button everything back down). Can someone tell me if I've done the hinging correctly for the console lid? Doesn't seem like it opens up far enough and it's been so long since I've taken it apart.
. Still putting the center console back together, but here are some random pics. The gauge cluster is just sitting in place (thinking about replacing the bulbs before I button everything back down). Can someone tell me if I've done the hinging correctly for the console lid? Doesn't seem like it opens up far enough and it's been so long since I've taken it apart.
03-10-2008, 09:43 PM
#14
Pro
Join Date: Nov 2007
Location: Spokane, Wa
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
The shifter came with the car.
I was going to buy the gauge rings for eagleday they for 129, they are made by NR but I got them right off NR's site for 99 bucks.
If the quality is not good they will go back, I had the factory ones in my 986S and they looked awesome. I just dont know who has the best quality ones. Ebay is always a crapshoot.
I was going to buy the gauge rings for eagleday they for 129, they are made by NR but I got them right off NR's site for 99 bucks.
If the quality is not good they will go back, I had the factory ones in my 986S and they looked awesome. I just dont know who has the best quality ones. Ebay is always a crapshoot.
BTW, I got the aluminum peddles a few months back and IMO it goes good with black/silver combo.
It is a matter of taste, I posted a pic for a visual aid, just in case.
03-10-2008, 09:55 PM
#15
Super Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 1998
Location: Northern New Jersey
Posts: 16,142
Likes: 0
Received 23 Likes
on
19 Posts
Love the look, I'm in the middle of doing mine as well . Still putting the center console back together, but here are some random pics. The gauge cluster is just sitting in place (thinking about replacing the bulbs before I button everything back down). Can someone tell me if I've done the hinging correctly for the console lid? Doesn't seem like it opens up far enough and it's been so long since I've taken it apart.
. Still putting the center console back together, but here are some random pics. The gauge cluster is just sitting in place (thinking about replacing the bulbs before I button everything back down). Can someone tell me if I've done the hinging correctly for the console lid? Doesn't seem like it opens up far enough and it's been so long since I've taken it apart.I have the metal hinge but I think that looks correct.