deckman

I understand the intake is on the opposite side and the fan needs to be moved.

Jake Ok

Holly ****.....I was just about to post the exact same question till I saw yours. Thanks and hope we both get some help and answers.

I was told it would be difficult to convert and fit an OEM MK II GT3 decklid onto a 996. Are you looking at the same for sale item...LOL

Jake

deckman

I'm looking at the one for sale in MD. Is that the one you're looking at?

John

Jake Ok

Jon Winter - On Pole Motor Sports??

Jon told me it will not fit.....what a coincidence.

Riad

Comon, with the name like deckman you should know this!!!

deckman

Nobody knows the answer to this?

Ray S

It can be made to fit in three easy steps....

1) Purchase spoiler
2) Remove engine and replace with GT3 crate motor
3) install spoiler

(sorry, at least I bumped the thread....)

deckman

There's one in every crowd

redridge

Dont purchase the GT3 wing.... purchase the aerokit for the carrera... This should have the intake in the right place

MikeZ

Where is the best place to buy the kit?

Jake Ok

What is going on here....we need a real answer guys and no smart s'es please.
Deckman, PM me... I know a place that sells a good aftermarket GT3 deck wing. We may be able to get a deal if we buy more than one.

Carrera Mike

Its a direct fit as long its OEM. Its "pulg n Play". I got one. The OEM GT3 lid comes with its own harness. make sure the key is out of the ignition the entire time you do this. The fan is moved from the old lid to the OEM GT3 lid in the same cofiguration. I dont remember the position being different.

Edit: I stand corrected. Redridge is correct. Below is a pix of Aerokit II OEM lid for an MY02 car. Also, the red one is a full bloded GT3. There is a difference in the fan and air intake positioning.

Jake Ok

Huh??? We are talking about fiting the OEM GT3 deck lid onto a 996. The fan and air duct is on the opposite side. The fan can be moved but what about the air intake duct?

Carrera Mike

My car is a MY 2002. This lid I installed is an Porsche OEM aero II rear(GT3). Do you see the fan? It only have one spot for it, and so is the intake.

Edit: I stand corrected. Redridge is correct. Below is a pix of Aerokit II OEM lid for an MY02 car. Also, the red one is a full bloded GT3. There is a difference in the fan and air intake positioning.

Carrera Mike

Here's a GT3 car. This is Old Guy's(Paul) red GT3(now replaced with 997 GT3).