What's involved fitting an OEM GT3 rear deck lid to a '02+ 996?
#2
Burning Brakes
Holly ****.....I was just about to post the exact same question till I saw yours. Thanks and hope we both get some help and answers.
I was told it would be difficult to convert and fit an OEM MK II GT3 decklid onto a 996. Are you looking at the same for sale item...LOL
Jake
I was told it would be difficult to convert and fit an OEM MK II GT3 decklid onto a 996. Are you looking at the same for sale item...LOL
Jake
The following users liked this post:
koja997 (06-30-2021)
#7
Ironman 140.6
Rennlist Member
Rennlist Member
Trending Topics
#11
Burning Brakes
What is going on here....we need a real answer guys and no smart s'es please.
Deckman, PM me... I know a place that sells a good aftermarket GT3 deck wing. We may be able to get a deal if we buy more than one.
Deckman, PM me... I know a place that sells a good aftermarket GT3 deck wing. We may be able to get a deal if we buy more than one.
#12
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Its a direct fit as long its OEM. Its "pulg n Play". I got one. The OEM GT3 lid comes with its own harness. make sure the key is out of the ignition the entire time you do this. The fan is moved from the old lid to the OEM GT3 lid in the same cofiguration. I dont remember the position being different.
Edit: I stand corrected. Redridge is correct. Below is a pix of Aerokit II OEM lid for an MY02 car. Also, the red one is a full bloded GT3. There is a difference in the fan and air intake positioning.
Edit: I stand corrected. Redridge is correct. Below is a pix of Aerokit II OEM lid for an MY02 car. Also, the red one is a full bloded GT3. There is a difference in the fan and air intake positioning.
Last edited by Carrera Mike; 12-18-2007 at 06:58 PM.
#13
Burning Brakes
Huh??? We are talking about fiting the OEM GT3 deck lid onto a 996. The fan and air duct is on the opposite side. The fan can be moved but what about the air intake duct?
#14
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Edit: I stand corrected. Redridge is correct. Below is a pix of Aerokit II OEM lid for an MY02 car. Also, the red one is a full bloded GT3. There is a difference in the fan and air intake positioning.
Last edited by Carrera Mike; 12-18-2007 at 07:01 PM.