PICS PICS PICS of my Upgrades
#1
PICS PICS PICS of my Upgrades
I couldn't hold out any longer. After I hit 50,000 miles, I did some upgrades, but didn't want to post pics until everything was done. All that's left is the Ruf front bumper, but here are a few teaser pics of the stuff that was done:
ROW suspension
5 Spoke Rims and Tires
7mm spacers(hubcentric fronts)
Fabspeed muffler bypass
Ruf Wing
Ruf Side Skirts
[Ruf front bumper being installed on Wed]
Third Radiator
Aluminum Guage Rings
Homelink Hack (in the works)
EDIT - All PICS INSERTED IN THIS POST The related thread is HERE. However, the pics are the same in both threads.
Click HERE to see the BEFORE shots.
ROW suspension
5 Spoke Rims and Tires
7mm spacers(hubcentric fronts)
Fabspeed muffler bypass
Ruf Wing
Ruf Side Skirts
[Ruf front bumper being installed on Wed]
Third Radiator
Aluminum Guage Rings
Homelink Hack (in the works)
EDIT - All PICS INSERTED IN THIS POST The related thread is HERE. However, the pics are the same in both threads.
Click HERE to see the BEFORE shots.
Last edited by himself; 09-03-2007 at 01:17 PM.
#6
Looks very good man! I actually like the wing even better than the factory aero wing.
I would move or even remove the Carrera batch, seems too close to the wing for me. Do you run wheel spacers in the rear or are these aftermarket wheels? I thought the all 18' OEM wheels have the same offset but your rear wheels look to end just perfect with the fender outside; my 18' turbo twist wheels are deeper in the fender.
I would move or even remove the Carrera batch, seems too close to the wing for me. Do you run wheel spacers in the rear or are these aftermarket wheels? I thought the all 18' OEM wheels have the same offset but your rear wheels look to end just perfect with the fender outside; my 18' turbo twist wheels are deeper in the fender.
#7
Thanks for the compliments all!
These are aftermarket rims from Wheel Dynamics - great guys and very knowledgeable. The rears have a 58 offset in the rear AND I'm also using a 7mm spacer on top of that. I think it gives the car a nicer stance from behind. Also, the 58 offset rims allow a 285/30 tire. The only downside is that the front rims are 57mm offset, and I really need 7mm spacers to be close to factory specs. But I had to take off my non-hubcentric 7mm spacers due to wheel wobble. I'm going to put on some 14mm when I get around to it.
[The wing has some sweet air intakes that I haven't posted pics of yet. When the front bumper is done, I'll post a full set of pics.]
-td
Originally Posted by hwk72
Do you run wheel spacers in the rear or are these aftermarket wheels?
[The wing has some sweet air intakes that I haven't posted pics of yet. When the front bumper is done, I'll post a full set of pics.]
-td