oh Sh!t
#31
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Do what your gut tells you! Just give yourself a day to accept what happened, clear your mind and go from there asking for opinions here always helps if there is good imput. However when you procede do it right the first time I hate revisiting realestate. Funny when I screw something up and I start taking the repair journey I start feeling better.
#32
Newbies Hospitality Director
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Apr 2005
Location: Winston-Salem, NC
Posts: 18,084
Likes: 0
Received 34 Likes
on
33 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Steven C.
Who in the world wants to ride around in an expensive car hoping that JB weld or any other pookie will stay on so I don't 1. burn the motor up or 2. get stuck in the middle of no where? Sorry guys but I have mixed a lot of JBW for interior parts and have glued motorcycle cases back together with loctite but I have never attempted to hold fluids at pressure in a casting with pookie for a permanent fix. This reasoning sounds insane to me....am I missing something here
When you go to sell it what will the PPI say? Strange mound of goo on oil or water casting...I picked at it and it gushed. If the PO fixed the car like this I would pass!
![Confused](https://rennlist.com/forums/images/smilies/confused.gif)
When you go to sell it what will the PPI say? Strange mound of goo on oil or water casting...I picked at it and it gushed. If the PO fixed the car like this I would pass!
BTW - did you really type "pookie?" When I read that, I laughed out loud! Glad I wasn't drinking a beverage at that time, otherwise I would have spit the liquid all over the monitor screen. WTF is "pookie?"
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
#33
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by gota911
WTF is "pookie?"
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#37
Newbies Hospitality Director
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Apr 2005
Location: Winston-Salem, NC
Posts: 18,084
Likes: 0
Received 34 Likes
on
33 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by CosmosC4S
Pookie (Puki) means vagina in Malaysian or Indonesian language...
Err...I know coz' I'm multi-lingual with that particular word.![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)
Err...I know coz' I'm multi-lingual with that particular word.
![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#40
Intermediate
Thread Starter
Join Date: Jan 2004
Location: London
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Guys,
thanks for all the input. I'm now comforted thats its not the core part of the block and that I can take out just the oil pump. As I'm due to sell the car I think I need to go down the new part route but will take some more advice from my mechanic. One day on I'm a little calmer about this but yesterday was horrible. Also managed to learn some potentailly useful language for a trip to Asia !
thanks for all the input. I'm now comforted thats its not the core part of the block and that I can take out just the oil pump. As I'm due to sell the car I think I need to go down the new part route but will take some more advice from my mechanic. One day on I'm a little calmer about this but yesterday was horrible. Also managed to learn some potentailly useful language for a trip to Asia !
#41
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by hoges11
Yes I get that now. Was following your suggestion Orient Express, only problem is I'm obviously crap at following instructions. When I saw the pic I took afterwards that L shape piece was so obvious, just wasnt while I was setting it up. I looked at the car and read the instructions on the list and looked and read and still got it wrong. Hopefuly the pic with that lovely red arrow makes it clear for anyone else who is going to try this.
I have replaced my dish-shaped jack saddle with a half inch thick, dense rubber pad, and I always feel much better putting the weight of the car on that flat rubber as opposed to the thin metal rims of the original jack saddle.
#42
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
looks like, take out the cats and muffler, support the engine, get the engine mounts off, take of the engine carrier, get the belt off and go to town to get to the piece... probably 2 days work with the proper equipment... The only way to fix this, is to do it right, replace the piece, accept what has happened and take it easy on yourself...in the end, you will sleep better!!!
#43
Intermediate
Thread Starter
Join Date: Jan 2004
Location: London
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Kim Yes like a fool I used the bare cup on the jack and thats what did the damage, stupid I know and I cant understand why I did that but hindsight is easy. Redridge I agree that I should get the job done properly looks like its £500ish for parts plus up to two days labour so maybe £1,500, expensive afternoon I had on Sunday!
#44
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by hoges11
Kim Yes like a fool I used the bare cup on the jack and thats what did the damage, stupid I know and I cant understand why I did that but hindsight is easy. Redridge I agree that I should get the job done properly looks like its £500ish for parts plus up to two days labour so maybe £1,500, expensive afternoon I had on Sunday!
#45
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Kims996Cab
It appears (though appearances can be deceiving) from the small indentation that you perhaps .... beside mislocating the jack .... used a bare jack saddle without any sort of pad. It looks like maybe a raised point on the saddle did this damage.
I have replaced my dish-shaped jack saddle with a half inch thick, dense rubber pad, and I always feel much better putting the weight of the car on that flat rubber as opposed to the thin metal rims of the original jack saddle.
I have replaced my dish-shaped jack saddle with a half inch thick, dense rubber pad, and I always feel much better putting the weight of the car on that flat rubber as opposed to the thin metal rims of the original jack saddle.
Last edited by marlinspike; 04-17-2007 at 11:08 PM.