Finally pics of the 996
12-06-2006, 08:00 PM
#31
Racer
Thread Starter
Originally Posted by Patrick
The wicker bill, or gurney flap, is part #996 512 988 00
2.4.1 Measure the gurney flap and transfer the width dimensions to the lower plane of the spoiler.
2.4.2 Apply adhesive, part number 999 915 400 00 on the bottom of the gurney flap in the center and
along its entire length. Diameter of the bead approx. 3 mm.Stick on the gurney flap flush with the
radius transition of the edge at the lower plane of the spoiler. Make sure that the gurney flap is
parallel with the edge. Immediately remove any emerging adhesive. Use adhesive tape to hold the
gurney flap in place during the adhesive hardening process (approx. 12 hours).
2.4.3 Measure the logo and transfer the width dimensions to the rear lid. The bonding height is 50 mm
from the lower edge. Remove film from the logo and stick the logo symmetrically onto rear lid.
(You may already have on ethat I didn't see in the pictures)
2.4.1 Measure the gurney flap and transfer the width dimensions to the lower plane of the spoiler.
2.4.2 Apply adhesive, part number 999 915 400 00 on the bottom of the gurney flap in the center and
along its entire length. Diameter of the bead approx. 3 mm.Stick on the gurney flap flush with the
radius transition of the edge at the lower plane of the spoiler. Make sure that the gurney flap is
parallel with the edge. Immediately remove any emerging adhesive. Use adhesive tape to hold the
gurney flap in place during the adhesive hardening process (approx. 12 hours).
2.4.3 Measure the logo and transfer the width dimensions to the rear lid. The bonding height is 50 mm
from the lower edge. Remove film from the logo and stick the logo symmetrically onto rear lid.
(You may already have on ethat I didn't see in the pictures)
Patrick cheers for the details
So just to make sure is it the part that I've highlighted in yellow, I won't be painting the part itself as I guess it will look good on yellow if it remains black.
12-06-2006, 08:39 PM
#32
Addict
Lifetime Rennlist
Member - times 3
Lifetime Rennlist
Member - times 3
Originally Posted by exlondoner
Patrick cheers for the details
So just to make sure is it the part that I've highlighted in yellow, I won't be painting the part itself as I guess it will look good on yellow if it remains black.
So just to make sure is it the part that I've highlighted in yellow, I won't be painting the part itself as I guess it will look good on yellow if it remains black.
12-07-2006, 11:19 AM
#35
Addict
Lifetime Rennlist
Member - times 3
Lifetime Rennlist
Member - times 3
Originally Posted by exlondoner
Sure is, whenever she gets out. Patrick going to order that part today, where's the best place to order from?
12-07-2006, 08:11 PM
#39
Racer
Thread Starter
Originally Posted by LVDell
Oh yeah baby! Welcome to the SPEED YELLOW club! 
Here's a pic of mine.
Here's a pic of mine.
Haha, very nice mate! My first choice was actually white of which I didn't find any for sale, but now I'm really happy that I went with this one.
Sorry but you owe me pics of her!!
12-07-2006, 08:15 PM
#40
Nordschleife Master
Originally Posted by exlondoner
Haha, very nice mate! My first choice was actually white of which I didn't find any for sale, but now I'm really happy that I went with this one.
Sorry but you owe me pics of her!!
Sorry but you owe me pics of her!!
Here's some more pics......
12-09-2006, 07:30 AM
#45
Newbies Hospitality Director
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Apr 2005
Location: Winston-Salem, NC
Posts: 18,084
Likes: 0
Received 34 Likes
on
33 Posts
Originally Posted by LVDell
Same here. White was my first choice........BUT the wife ORDERED me to get speed yellow. I can't tell you how much I was hesitant to getting yellow, but oh yeah....I LOVE IT!
Here's some more pics......
Here's some more pics......