4 YOUR EYES ONLY!!!!
11-14-2006, 09:19 AM
#20
I look at Gembella and RUF porsches that have interior design with exterior color schemes and I love it. My black int. is too boring, need to get that int. a little kick to it. The paint work with 7 layer of acrylic and 3 layer of clear coat, so it should last a long time.
Yes, Red is my good fortune color. I have been doing very well with my financial and I have a great family.
Yes, Red is my good fortune color. I have been doing very well with my financial and I have a great family.
11-14-2006, 10:44 AM
#22
What do you expect, living in the movie capital of the world with movie stars, celebraties not to mention all the music moguls. This is the land of Porsches, Ferraris, Benzes, Bimmers and ultra exotic carriages. My neighborhood alone there are 11 Porschmeisters.
I just want to be different then the rest....The women here just can't get enough of it.
I know what you meant. Actually the surface is semi soft plastic. You can use 400 sand paper. Then use plastic surface primer, let it dry for 5-6 hrs. After that you are all set to paint. Make sure each layer of paint should have time to dry (1/2 hour) before apply the next coat. Do this for 6-7 times. When it's done the paint should be very thick and have a excellent shine to surface. Wait for a day or two before install it. Use clean soft cloth to reinstall the part, don't use your bare fingers or hands. Good luck!!!
I just want to be different then the rest....The women here just can't get enough of it.
I know what you meant. Actually the surface is semi soft plastic. You can use 400 sand paper. Then use plastic surface primer, let it dry for 5-6 hrs. After that you are all set to paint. Make sure each layer of paint should have time to dry (1/2 hour) before apply the next coat. Do this for 6-7 times. When it's done the paint should be very thick and have a excellent shine to surface. Wait for a day or two before install it. Use clean soft cloth to reinstall the part, don't use your bare fingers or hands. Good luck!!!
11-14-2006, 12:36 PM
#25
The wheels I got from a place in Torrance, CA. The guy set up a small shop that sell wheels for Porsche, Benz, Bimmer. These wheels call Ruger RS5. They are 8.5/19 front, 10.5/19 rear. If you live locally you can visit his shop. I got them at very good price. I think the shop name is Got Your Wheels.
I was thinking of getting GT3 sport seats in red. I do have red harness in my car. About the steering wheel, where did you get it? And how much is it?
Thank you for all members advises, comments, and compliments.
I was thinking of getting GT3 sport seats in red. I do have red harness in my car. About the steering wheel, where did you get it? And how much is it?
Thank you for all members advises, comments, and compliments.
11-14-2006, 01:02 PM
#26
Addict
Rennlist Member
Rennlist Member
How did you prep the factory pieces for paint ?
11-14-2006, 01:07 PM
#27
Three Wheelin'
Join Date: Jul 2006
Location: NEast Florida
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 996superfly
I was thinking of getting GT3 sport seats in red. I do have red harness in my car. About the steering wheel, where did you get it? And how much is it?
Thank you for all members advises, comments, and compliments.
Thank you for all members advises, comments, and compliments.
As it is now, it's an elegant back with interesting red highlights.
You have all red on the outside already, you don't need to drown the black on the inside with red seats, steering wheel and side door panels!
For seats, I'd suggest red stitching if available.
11-14-2006, 01:17 PM
#28
Originally Posted by CosmosC4S
I have to say though, that if you do too much it could overkill.
As it is now, it's an elegant back with interesting red highlights.
You have all red on the outside already, you don't need to drown the black on the inside with red seats, steering wheel and side door panels!
For seats, I'd suggest red stitching if available.
As it is now, it's an elegant back with interesting red highlights.
You have all red on the outside already, you don't need to drown the black on the inside with red seats, steering wheel and side door panels!
For seats, I'd suggest red stitching if available.
Deviated red stitching would be a nice touch. For the record...the reason I redid the arm rests and the center console lid was to add padding as the stock parts were hard as rock. Since I was doing this I decided to go red 
Either way I would recommend the GT3 seats! I got the steering wheel from FVD.
11-14-2006, 02:45 PM
#29
Three Wheelin'
Join Date: Jul 2006
Location: NEast Florida
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
wross996tt, Don't get me wrong, I like yours as well!
And you are right, yours are different areas of red, yet not overdone.
A combo of yours and superfly's would be overkill...kinda gives you a very busy and restless ambience.
And you are right, yours are different areas of red, yet not overdone.
A combo of yours and superfly's would be overkill...kinda gives you a very busy and restless ambience.
11-14-2006, 02:49 PM
#30
Originally Posted by CosmosC4S
wross996tt, Don't get me wrong, I like yours as well!
And you are right, yours are different areas of red, yet not overdone.
A combo of yours and superfly's would be overkill...kinda gives you a very busy and restless ambience.
And you are right, yours are different areas of red, yet not overdone.
A combo of yours and superfly's would be overkill...kinda gives you a very busy and restless ambience.
