hinchcliffe

Can be replica or Stock Cup I,II or Twists wheels 7 or 7-1/2" x 17" and 9" x 17".

They don't need to be perfect, just straight and true. Let me know what you got. Thanks.

Riad

Curt,

I have a set of 4 replica twists with Dunlop Winter M2's on them... I'll take some pictures tomorrow and send them to you.

Rob

hinchcliffe

Check for the offsets too. I believe they would be around ET 55mm for front and rear.

Riad

Will do.

cohare

I have some real twists 17's. Do you want tires too or just wheels? Mine have tires Potenza's on them, almost new..

hinchcliffe

Looking for just rims. But depending on price I may take tire on them.

vette67

I'm trying to make a deal on some 18"s for my 2000 Cab-4 right now. If successful my stock 17"s will be available right away.

hinchcliffe

Let me know vette, Any idea of the offsets? PM me with a price.

vette67

I'll check the manual and let you know. They are the stock wheels for the MY 2000 Cabriolet 4 if you want to look them up. I've done nothing but put a set of Pilot Sports on them about 10K miles ago.

LVDell

vette. the size and offset should be stamped near the valve stem. If not, then the manual is the next best thing.

Paul 996

To piggyback on Curt's thread. I'll take whatever set of 17's he doesn't take for my 1999 996 narrow body.
Curt the 996 narrow body offsets are as follows.
Front offsets are between 50 and 55 for the 7, 7.5 and 8's
Rear offsets can be from 55 for 9's up to 65 for the 10's

For that matter, I am interested in some 18's as well. PM or email me. I need both winter wheels and some track wheels.

-Paul

hinchcliffe

Vette, you got a price on them there wheels?

vette67

Thanks, I just PM'd you the info.

These stock 17" wheels are 7x55 (front) and 9x55 (rear).