You want loud:)? Bypass Pipes...
#16
What I don't get is why are the Fabspeed pipes so much? I mean (and I own them) all they are is a 90 degree bent pipe with tips. Why doesn't someone else mandrel bend some stainless pipe and sell them for say $100 a set without tips (which could be mounted seperately)
#18
That's my question. I can imagine that any good muffler shop could make them although I went to my local shop and they said they can't get that bend in stainless without kinking the pipe so maybe there is more than meets the eye but I wish someone here would chime in with a cheap alternative!
#20
Thread Starter
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: Oct 2002
Posts: 7,427
Likes: 85
From: san jose, california
Originally Posted by mitch236
What I don't get is why are the Fabspeed pipes so much? I mean (and I own them) all they are is a 90 degree bent pipe with tips. Why doesn't someone else mandrel bend some stainless pipe and sell them for say $100 a set without tips (which could be mounted seperately)
#21
Originally Posted by karlooz
your headers look like standard 996 fare. mine are sitting in the corner of the garage.
#22
Originally Posted by sharkster
Hehe very cool indeed (but you NEED headers) . I also run 5 inch straight pipes off of the turbos on my 996TT so I know where you are coming from.. I'll post pix. It's UGLY!
Different headers might have some impact. Right now I'm working on a mod that varies backpressure with rpm. Now that would be an advantage.
Jim
#24
What's the diameter of the 996 exhaust? It looks like 2 1/8". I think I might have a relatively inexpensive, but nice solution. Depends on the diameter though.
Last edited by Russ Murphy; 01-28-2006 at 04:19 PM.
#26
Yeah, I know about that route. I'm talking about 304 stainless mandrel bends and tips from Borla. It's about $200 if I can get the 2 1/4" to work. Get the ends swaged down or something of the like.
Last edited by Russ Murphy; 01-28-2006 at 04:50 PM.
#30
Originally Posted by dpblessing
waiting for the sound clip...
They have a video.