Fabspeed 996 Airbox Upgrade
#16
Rennlist Member
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
that wiring harness is 3/4 " thick with it's plastic protective sleeve - how could you even have bolted the two halves together ?- the screws wouldn't come close enough to seat more than a couple turns .
#18
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
"it shouldn't be unbolted for any of these box mods."
I mistakenly thought the Fabspeed box came with a new entire upper portion of the two peice airbox which would require moving the MAF.
fdr, it's going to be hard to tell until the MAF is replaced if they're telling you it might be bad. Once it is replaced, your problem may go away.
I mistakenly thought the Fabspeed box came with a new entire upper portion of the two peice airbox which would require moving the MAF.
fdr, it's going to be hard to tell until the MAF is replaced if they're telling you it might be bad. Once it is replaced, your problem may go away.