wheel offset question

Reply Subscribe

Thread Tools

Search this Thread

Mar 13, 2004 | 07:55 PM

mtksurfj

Thread Starter

Rennlist Member

Joined: Sep 2003

Posts: 353

Likes: 1

From: Montauk

wheel offset question

Found some wheels but the front offset is 52mm and the rear is 65mm.

Will that work out on a 996 C4?

Thanks

Last edited by mtksurfj; Dec 19, 2018 at 10:45 AM.

Mar 13, 2004 | 08:05 PM

Viken

Keeper of the Truth
Lifetime Rennlist
Member

Joined: May 2001

Posts: 6,487

Likes: 8

From: So Cal

Yes. Assuming they are factory sizes.

Mar 13, 2004 | 08:21 PM

mtksurfj

Thread Starter

Rennlist Member

Joined: Sep 2003

Posts: 353

Likes: 1

From: Montauk

18X8.5 ET52
18X10 ET47

Mar 13, 2004 | 08:25 PM

Viken

Keeper of the Truth
Lifetime Rennlist
Member

Joined: May 2001

Posts: 6,487

Likes: 8

From: So Cal

Quote:

Originally posted by rbarna
18X8.5 ET52
18X10 ET47

Well, that's a bit different from what you posted above. At any rate, the front might be a squeeze while the rear won't fit. I suggest you stick with factory sizes and offsets.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump