996 muffler dimensions
#16
Rennlist Member
#17
LS3 480 swap, custom 180 degree headers, custom air intake, rebuilt trans w/new ring and pinion, Wavetrac LSD, and billet side plate. Custom wiring harness, GM accelerator pedal, new all aluminum B flute radiators (2), and center mounted engine oil cooler. Suspension freshen-up with Ohlins r&t coilovers, all new rubber bushings, and some Elephant Racing upgrades here and there (thank you Chuck). New brakes, and CCW wheels.[img]blob:https://rennlist.com/452b1c61-2b4b-4633-83aa-9eded784c291[/img]
I’ll send updated photos soon.
I’ll send updated photos soon.
The following users liked this post:
808Bill (10-24-2019)
#19
Rennlist Member
What's the distance between the sump and the ground?
#20
Not sure yet, however the oil pan that came on the crate motor is for a Camero. It has been replaced with a Corvette style oil pan. The new pan is 6 inches shorter. (I’ll try to get some pictures, and post) With the shallow pan installed the ground clearance will be the same as the original flat six. I hope to make up for the loss of oil capacity by adding an oil cooler in the front center of the car.