When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ive got a 99 996 with the rear wiper delete plug installed. In my attempt to re option the car to "as ordered," I'd like to re install the rear wiper, which the car is still wired for(dash button and wiring plug in rear shelf.)
Ive got one question: Are there any seals missing from this motor? I just cant find any schematics that show what, if anything, needs for this to be water tight. Or maybe it doesn't and there's a drain I am not aware of?
Tommy, just be careful with those rear wipes. It's best not to pull them back in "service mode" when washing you car. They're known to whip back and scratch the car. My car still has a scratch where the previous owner pulled it back to clean the car and it snapped back and left a nasty cut in the paint.
Tommy, just be careful with those rear wipes. It's best not to pull them back in "service mode" when washing you car. They're known to whip back and scratch the car. My car still has a scratch where the previous owner pulled it back to clean the car and it snapped back and left a nasty cut in the paint.
Whoa! Thanks for the heads up. Those details are xactly why I asked here!
10-15-2018, 01:15 PM
Re-Install Rear Wiper
